| 数据搜索系统,热门电子元器件搜索 |
|
ST92F124 数据表(PDF) 166 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST92F124 数据表(HTML) 166 Page - STMicroelectronics |
|
166 / 429 page ![]() 166/429 STANDARD TIMER (STIM) STANDARD TIMER (Cont’d) 10.2.4 Register Description COUNTER HIGH BYTE REGISTER (STH) R240 - Read/Write Register Page: 11 Reset value: 1111 1111 (FFh) Bits 7:0 = ST.[15:8]: Counter High-Byte. COUNTER LOW BYTE REGISTER (STL) R241 - Read/Write Register Page: 11 Reset value: 1111 1111 (FFh) Bits 7:0 = ST.[7:0]: Counter Low Byte. Writing to the STH and STL registers allows the user to enter the standard timer constant from 1 (0000h) to 65536 (FFFFh). Reading these regis- ters provides the counter's current value. Thus it is possible to read the counter on-the-fly. STANDARD TIMER PRESCALER REGISTER (STP) R242 - Read/Write Register Page: 11 Reset value: 1111 1111 (FFh) Bits 7:0 = STP.[7:0]: Prescaler. The Prescaler value for the Standard Timer is pro- grammed into this register. When reading the STP register, the returned value corresponds to the programmed data instead of the current data. 00h: No prescaler 01h: Divide by 2 FFh: Divide by 256 STANDARD TIMER CONTROL REGISTER (STC) R243 - Read/Write Register Page: 11 Reset value: 0001 0100 (14h) Bit 7 = ST-SP: Start-Stop Bit. This bit is set and cleared by software. 0: Stop counting 1: Start counting Bit 6 = S-C: Single-Continuous Mode Select. This bit is set and cleared by software. 0: Continuous Mode 1: Single Mode Bits 5:4 = INMD[1:2] Bit 3 = INEN These 3 bits select the clock source. Bit 2 = INTS: Interrupt Selection. 0: Standard Timer interrupt enabled 1: Standard Timer interrupt is disabled and the ex- ternal interrupt pin is enabled. Bits 1:0 = OUTMD[1:2]: Output Mode Selection. These bits select the output functions as described in Section 10.2.2.3. 70 ST.15 ST.14 ST.13 ST.12 ST.11 ST.10 ST.9 ST.8 70 ST.7 ST.6 ST.5 ST.4 ST.3 ST.2 ST.1 ST.0 70 STP.7 STP.6 STP.5 STP.4 STP.3 STP.2 STP.1 STP.0 70 ST -SP S-C INMD1 INMD2 INEN INTS OUTMD1 OUTMD2 INMD1 INMD2 INEN Clock input 00 1 CLOCK2/1024 XX 0 INTCLK/4 OUTMD1 OUTMD2 Mode 00 No output mode 01 Square wave output mode 1x PWM output mode 9 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |