TCS3530 datasheet(38/106 Pages) OSRAM

38 / 106 page

Datasheet, Public

Page 37

[v3-00] 2023-Jun-23

Document Feedback

TCS3530 − Register Overview

AGC Number of Samples Register

Figure 43:

AGC Number of Samples

Note(s):

1. Return to the Register Map (0x99, 0x9A).

STATUS Register

Figure 44:

STATUS

Bits

Addr

Field

Reset

Type

Description

7:0

0x99

AGC_NR_

SAMPLES[7:0]

0R/W

AGC Number of Samples: Sets the

number of samples for every AGC

measurement.

7:3

0x9A

Reserved

2:0

0x9A

AGC_NR_

SAMPLES[10:8]

0R/W

Addr: 0x9B

STATUS

Bit

Field

Reset

Type

Bit Description

7MINT

R/W

Modulator Interrupt: Indicates that a modulator

interrupt has occurred because of saturation. Check the

STATUS2 register to differentiate between analog or

digital saturation. Writing 1 to this bit clear MINT and all

subsequent interrupts.

6:4

Reserved

3AINT

R/W

ALS Interrupt: If AIEN is set, this interrupt indicates that

an ALS event that met the programmed ALS thresholds

(AILT or AIHT) and persistence (APERS) occurred. Check

the STATUS3 register to differentiate. Writing 1 to this bit

clear AINT and all subsequent interrupts.

2FINT

R/W

FIFO Interrupt. Indicates that the data level in the FIFO

met the programmed FIFO thresholds (FIFO_LVL and

FIFO_THR). This interrupt is automatically

asserted/removed depending on the programmed FIFO

thresholds. Writing 1 to this bit clears FINT. The interrupt,

however, will be promptly asserted again in case the FIFO

has not been read out or cleared.

TCS3530 数据表(PDF) 38 Page - OSRAM GmbH

TCS3530 数据表(HTML) 38 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载