TCS3530 datasheet(41/106 Pages) OSRAM

41 / 106 page

Page 40

Datasheet, Public

Document Feedback

[v3-00] 2023-Jun-23

TCS3530 − Register O ver view

STATUS 4 Register

Figure 47:

STATUS4

Note(s):

1. Return to the Register Map (0x9E).

Addr: 0x9E

STATUS4

Bit

Field

Reset

Type

Bit Description

7:4

Reserved

MOD_SAMPLE_

TRIGGER_ERROR

Indicates that Measured Data is Corrupted. For a valid

measurement, this bit must not be asserted. This error

condition does not trigger an interrupt, however AEN and

FDEN will be cleared and SINT_MEASURMENT_

SEQUENCER will be set. Writing “1” clears this bit.

MOD_TRIGGER_

ERROR

Indicates that WTIME is too short for the programmed

configuration (SAMPLE_TIME, ALS_NR_SAMPLES, FD_NR_

SMAPLES). This error condition does not trigger an

interrupt. Writing “1” clears this bit.

SAI_ACTIVE

Sleep After Interrupt Active. Indicates that the device is

in sleep due to an interrupt. To exit sleep mode, clear this

bit by writing “1” to CLEAR_SAI_ACTIVE.

0INIT_BUSY

Initialization Busy. Indicates that the device is

initializing. This bit will remain 1 for about 300μs after

power on. Do not interact with the device until

initialization is complete (e.g. via I²C/I3C).

TCS3530 数据表(PDF) 41 Page - OSRAM GmbH

TCS3530 数据表(HTML) 41 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载