 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
M58PR512LE 数据表(PDF) 116 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M58PR512LE 数据表(HTML) 116 Page - STMicroelectronics |
|
|
116 / 119 page  Command interface state tables M58PR256LE, M58PR512LE, M58PR001LE 116/119 Note: 1 WP = Word Program, BP = Buffer program, cmd = command, SR = Status Register, pgrm = program, IS = Illegal state, PS = Program suspend, ES = Erase suspend, CI = Command Interface, CR = Configuration Register, BEFP = Buffer Enhanced Factory Program, P/E. C. = Program/Erase Controller, WA0 = Address in a block different from first BEFP address, ECR = Enhanced Configuration Register. 2 The output state shows the type of data that appears at the outputs if the bank address is the same as the command address. A bank can be placed in Read Array, Read Status Register, Read Electronic Signature or Read CFI mode, depending on the command issued. Each bank remains in its last output state until a new command is issued to that bank. The next state does not depend on the bank output state. 3 At Power-up, all banks are in Read Array mode. Issuing a Read Array command to a busy bank results in undetermined data output. 4 The Clear Status Register command clears the Status Register error bits except when the P/EC is busy or suspended. 5 BEFP is allowed only when Status Register bit SR0 is reset to ‘0’. BEFP is busy if the block address is the first BEFP address. Any other commands are treated as data. Table 56. Command interface states - modify table, next output 2 Current Chip State command input to chip and resulting chip next state Clear SR Read ID Lock, CR, ECR Setup Lock EFA Setup Blank Check OTP Setup Lock Confirm Lock- down Confirm Write CR/ ECR Confirm Illegal cmd or BEFP Data 50h 90h 98h 60h 64h BCh C0h 01h 2Fh 03h 04h others BEFP Setup, BEFP program and verify busy, Erase Setup, Erase EFA setup OTP Setup, BP Confirm, WP setup, WP setup in ES, BP confirm in ES, blank check setup status read EFA block WP setup, EFA block program setup in ES EFA block status read Lock/CR/ECR setup, Lock/CR/ECR setup in ES status read array read status read EFA block lock setup, EFA block lock setup in ES EFA block status read array read EFA block status read OTP busy output state does not change ID read status read EFA block status read status read output state does not change output state does not change ready, ES, BP suspend, WP busy, erase busy, BP busy, blank check busy, BP busy in ES, WP suspend, WP busy in ES, PS in ES, BP suspend in ES BP setup, BP load 1, BP load 2, IS output state does not change |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
