STA382BWSTR datasheet(17/172 Pages) STMICROELECTRONICS

17 / 172 page

STA382BWS

Description

Doc ID 022784 Rev 1

17/172

Description

The STA382BWS is an integrated solution embedding digital audio processing, digital

amplification, FFXTM power output stage, headphone and 2 Vrms line outputs. It is part of

the Sound Terminal® family and provides full digital audio streaming from the source to the

speaker, offering cost effectiveness, low power dissipation and sound enrichment.

The STA382BWS input section consists of a flexible digital input serial audio interface,

feeding the digital processing unit, and an analog 1 Vrms input for a seamless connection

with pure analog sources. The serial audio data input interface supports many formats,

including the popular IIS format.

The STA382BWS is based on an FFXTM (Fully Flexible Amplification) processor, proprietary

technology from STMicroelectronics. FFXTM is the evolution of the ST ternary technology:

the advanced processor is available for ternary, binary, binary differential and phase shift

PWM modulation. STA382BWS embeds the ternary, binary and binary differential

implementations, a subset of the full capability of the FFXTM processor.

The STA382BWS power section consists of four independent half-bridges. These can be

configured via digital control to operate in different modes. A 2.1-channel setup can be

implemented with two half-bridges (L/R) together with a single full-bridge (subwoofer).

Alternatively, the 2.0-channel setup can be done with two full-bridges. When using this

configuration, an external amplifier for the SW channel can also be driven through the PWM

output. The STA382BWS is able to deliver 2 x 20 W (ternary) into an 8

Ω load at 18 V or

2 x 9 W (binary) into a 4

Ω load, plus 1 x 20 W (ternary) into an 8 Ω load at 18 V.

The STA382BWS also provides a capless headphone out (with embedded negative charge

pump), able to deliver up to 40 mW into a 32

Ω load or, alternatively, can be configured as a

2 Vrms line output.

The STA382BWS digital processing unit includes up to 12 programmable biquads (EQs),

allowing perfect sound equalization and offering advanced noise-shaping techniques.

Moreover, the coefficient range ensures a great variety of filter shapes (low/high-pass,

low/high shelf, peak, notch, band-pass). The equalization engine is fully compatible with the

ST speaker compensation technology embedded into the APWorkbench suite. A state-of-

the-art multi-band DRC, STCompressorTM, equalizes the system to provide active speaker

protection with full audio quality preservation against sudden sound peaks. Moreover,

STSpeakerSafeTM technology offers reliable speaker protection under any condition. The

master clock can be from stable BICKI (64xfs, 50% duty cycle) or external XTI.

Obsolete

Product(s)

- Obsolete

Product(s)

STA382BWSTR 数据表(PDF) 17 Page - STMicroelectronics

STA382BWSTR 数据表(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载