D950-CORE datasheet(40/89 Pages) STMICROELECTRONICS

40 / 89 page

40/89

D950-Core

SOFTWARE ARCHITECTURE

5.1

Introduction

Instruction execution is performed in a 3-stage pipeline: fetch/decode/execute. While

instruction n is executed, instruction n+1 is decoded and instruction n+2 is fetched. The

instruction cycle period is twice the CLKIN period. According to the number of words used,

D950-Core instructions can be of two types: one word intructions or extension word

instructions.

One Word Instructions:

Most of D950-Core instructions are one cycle instructions:

•

All arithmetic and logic instructions with or without parallel data moves,

excepted instructions performing double precision multiplication and bit manip-

ulations.

•

Memory to register indirect data move.

The following are multiple cycle instructions:

•

Double precision MAC (two cycles).

•

Indirect indexed register move (two cycles).

•

Indirect indexed register to stack move (two cycles).

•

Instructions causing a program flow change (RTS, RTI, SWI, RESET, BREAK, CONTINUE)

are executed in one to three cycles.

Extension Word Instructions:

One program memory word is fetched at each cycle, therefore, if an instruction needs

extension words, they are fetched during the cycles following the first fetch. Execution of the

instruction starts two cycles after its first fetch cycle.

•

Memory to register data move in direct addressing mode (2-words/2-cycles)

(second word = address value).

•

Immediate register load (2-words/2-cycles) (second word = register value).

•

Repeat block up to 511 times (2-words/2-cycles) (second word = LE).

•

Repeat single up to 216-1 times (2-words/2-cycles) (second word = LC).

•

Repeat block computed (2-words/2-cycles) (second word = LC).

•

Bit manipulations (2-words/2-cycles) (second word = mask).

D950-CORE 数据表(PDF) 40 Page - STMicroelectronics

D950-CORE 数据表(HTML) 40 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

数据表下载