CC115LRGPR datasheet(39/74 Pages) TI2

39 / 74 page

CC115L

www.ti.com

SWRS105B – MAY 2011 – REVISED JUNE 2014

Table 5-12. GDOx Signal Selection (x = 0, 1, or 2) (continued)

GDOx_CFG

Description

[5:0]

48 (0x30)

CLK_XOSC/1

Note: There are 3 GDO pins, but only one

CLK_XOSC/n can be selected as an output at any

49 (0x31)

CLK_XOSC/1.5

time. If CLK_XOSC/n is to be monitored on one of

50 (0x32)

CLK_XOSC/2

the GDO pins, the other two GDO pins must be

configured to values less than 0x30. The GDO0

51 (0x33)

CLK_XOSC/3

default value is CLK_XOSC/192.

52 (0x34)

CLK_XOSC/4

To optimize RF performance, these signals should

not be used while the radio is in TX mode.

53 (0x35)

CLK_XOSC/6

54 (0x36)

CLK_XOSC/8

55 (0x37)

CLK_XOSC/12

56 (0x38)

CLK_XOSC/16

57 (0x39)

CLK_XOSC/24

58 (0x3A)

CLK_XOSC/32

59 (0x3B)

CLK_XOSC/48

60 (0x3C)

CLK_XOSC/64

61 (0x3D)

CLK_XOSC/96

62 (0x3E)

CLK_XOSC/128

63 (0x3F)

CLK_XOSC/192

Detailed Description

Submit Documentation Feedback

Product Folder Links: CC115L

CC115LRGPR 数据表(PDF) 39 Page - Texas Instruments

CC115LRGPR 数据表(HTML) 39 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

数据表下载