PM0214 datasheet(76/245 Pages) STMICROELECTRONICS

76 / 245 page

The STM32 Cortex-M4 instruction set

PM0214

76/245

DocID022708 Rev 4

registers in reglist. The accesses happen in order of increasing register numbers, with the

lowest numbered register using the lowest memory address and the highest number

Rn + 4 * (n-1) is written back to Rn.

For LDMDB, LDMEA, STMDB, and STMFD the memory addresses used for the accesses

are at 4-byte intervals ranging from Rn to Rn - 4 * (n-1), where n is the number of registers in

reglist. The accesses happen in order of decreasing register numbers, with the highest

numbered register using the highest memory address and the lowest number register using

the lowest memory address. If the writeback suffix is specified, the value Rn - 4 * (n) is

written back to Rn.

The PUSH and POP instructions can be expressed in this form (see PUSH and POP for

details).

Restrictions

In these instructions:

•

Rn must not be PC

•

reglist must not contain SP

•

In any STM instruction, reglist must not contain PC

•

In any LDM instruction, reglist must not contain PC if it contains LR

•

reglist must not contain Rn if you specify the writeback suffix

When PC is in reglist in an LDM instruction:

•

bit[0] of the value loaded to the PC must be 1 for correct execution, and a branch

occurs to this halfword-aligned address.

•

If the instruction is conditional, it must be the last instruction in the IT block

Condition flags

These instructions do not change the flags.

Examples

LDM R8,{R0,R2,R9}

; LDMIA is a synonym for LDM

STMDB R1!,{R3-R6,R11,R12}

Incorrect examples

STM R5!,{R5,R4,R9}

; value stored for R5 is unpredictable

LDM R2, {}

; there must be at least one register in the list

PM0214 数据表(PDF) 76 Page - STMicroelectronics

PM0214 数据表(HTML) 76 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载