| 数据搜索系统,热门电子元器件搜索 |
|
CS7654 数据表(PDF) 20 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS7654 数据表(HTML) 20 Page - Cirrus Logic |
|
20 / 62 page ![]() CS7654 20 In mode 1 the CS7654 displays the image captured by the camera. Multi-standard Output Format Modes The CS7654 supports a wide range of analog out- put formats compatible with worldwide broadcast standards. These formats include NTSC-M, NTSC- J, PAL-B/D/G/H/I, PAL-M, PAL-N, and PAL Combination N (PAL-Nc) which is the broadcast standard used in Argentina. After RESET, the CS7654 defaults to NTSC-M operation with ITU R.BT 601 analog timing. NTSC-J can also be sup- ported in the Japanese format by turning off the 7.5 IRE pedestal through the PED bit in the CONTROL_1 Register (0x01) at SA 0x00. Output formats are configured by writing control registers with the values shown in Table 5. Subcarrier Generation The CS7654 automatically synthesizes NTSC and PAL color subcarrier clocks using the CLK fre- quency and four control registers (SC_SYNTH0/1/2/3). The NTSC subcarrier syn- thesizer is reset every four fields (every eight fields for PAL). The SC_SYNTH0/1/2/3 registers used together provide a 32-bit value that defaults to NTSC (43E0F83Eh) following RESET. Table 4 shows the 32-bit value required for each of the different broadcast formats. Color Bar Generator The CS7654 is equipped with a color bar generator that is enabled through the CBAR bit of the CONTROL_1 Register lodated at SA 0x00. The color bar generator works in master Mode only and has no effect on the video input/output timing. The color bar generator will override the video input pixel data. The output of the color bar generator is instantiated after the chroma interpolation filter and before the luma delay line. The generated color bar numbers are for 100% amplitude, 100% saturation NTSC EIA color bars or 100% amplitude, 100% satura- 261 262 12 3 4 5 6 7 8 9 Start of VSYNC 10 22 Field 1 Burst begins with positive half-cycle Burst begins with negative half-cycle Burst phase = reference phase = 180 relative to B-Y 0 Burst phase = reference phase = 180 relative to B-Y 0 262 263 12 3 4 5 6 7 8 9 10 22 261 262 12 3 4 5 6 7 8 9 10 22 262 263 12 3 4 5 6 7 8 9 10 22 Field 2 Field 3 Field 4 Start of VSYNC Figure 7. NTSC Video Non-Interlaced Progressive Scan Timing |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |