| 数据搜索系统,热门电子元器件搜索 |
|
LPC47M14X 数据表(PDF) 38 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
LPC47M14X 数据表(HTML) 38 Page - SMSC Corporation |
|
38 / 205 page ![]() SMSC DS – LPC47M14X Page 38 Rev. 03/19/2001 Table 14 – Status Register 1 BIT NO. SYMBOL NAME DESCRIPTION 7 EN End of Cylinder The FDC tried to access a sector beyond the final sector of the track (255D). Will be set if TC is not issued after Read or Write Data command. 6 Unused. This bit is always "0". 5 DE Data Error The FDC detected a CRC error in either the ID field or the data field of a sector. 4 OR Overrun/ Underrun Becomes set if the FDC does not receive CPU or DMA service within the required time interval, resulting in data overrun or underrun. 3 Unused. This bit is always "0". 2 ND No Data Any one of the following: 1. Read Data, Read Deleted Data command - the FDC did not find the specified sector. 2. Read ID command - the FDC cannot read the ID field without an error. 3. Read A Track command - the FDC cannot find the proper sector sequence. 1 NW Not Writeable WP pin became a "1" while the FDC is executing a Write Data, Write Deleted Data, or Format A Track command. 0 MA Missing Address Mark Any one of the following: 1. The FDC did not detect an ID address mark at the specified track after encountering the index pulse from the nINDEX pin twice. 2. The FDC cannot detect a data address mark or a deleted data address mark on the specified track. Table 15 – Status Register 2 BIT NO. SYMBOL NAME DESCRIPTION 7 Unused. This bit is always "0". 6 CM Control Mark Any one of the following: Read Data command - the FDC encountered a deleted data address mark. Read Deleted Data command - the FDC encountered a data address mark. 5 DD Data Error in Data Field The FDC detected a CRC error in the data field. 4 WC Wrong Cylinder The track address from the sector ID field is different from the track address maintained inside the FDC. 3 Unused. This bit is always "0". 2 Unused. This bit is always "0". 1 BC Bad Cylinder The track address from the sector ID field is different from the track address maintained inside the FDC and is equal to FF hex, which indicates a bad track with a hard error according to the IBM soft-sectored format. 0 MD Missing Data Address Mark The FDC cannot detect a data address mark or a deleted data address mark. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |