Data Sheet

ADP1034

SPECIFICATIONS

analog.com

Rev. 0 | 8 of 41

1-Wire Serial Interface Timing Diagram

Figure 2. PPC Timing Diagram for a Complete Transmission

REGULATORY INFORMATION

See Table 10 and the Insulation Lifetime section for the recommended maximum working voltages for specific cross isolation waveforms and

insulation levels.

Table 3. Safety Certifications

UL (Pending)

CSA (Pending)

VDE (Pending)

Recognized Under UL 1577 Component

Recognition Program

Approved under CSA Component Acceptance Notice 5A

Certified according to DIN V VDE V 0884-10

(VDE V 0884-10):2006-12

2500 V rms Single Protection

CSA 60950-1-07+A1+A2 and IEC 60950-1, second edition, +A1+A2: basic

insulation at 300 V rms (424 V peak)

Basic insulation, 565 V peak

CSA 61010-1-12 and IEC 61010-1 third edition: basic insulation at 300 V rms

mains, 300 V rms (424 V peak) secondary

ELECTROMAGNETIC COMPATIBILITY

Table 4.

Regulatory Body

Standard

Comment

SGS/Compliance Certification Services, Inc. (CCSrf)

CISPR11 Class B

Pending

INSULATION AND SAFETY RELATED SPECIFICATIONS

Table 5.

Parameter

Symbol

Value

Unit

Test Conditions/Comments

Rated Dielectric Insulation Voltage

2500

V rms

1-minute duration

Minimum External Air Gap (Clearance)

Field Power Domain to Master Domain

2.15

mm min

Measured from field power pins and pads to master pins and pads,

shortest distance through air

Field Power Domain to Slave Domain

2.15

mm min

Measured from field power pins and pads to slave pins and pads, shortest

distance through air

Master Domain to Slave Domain

2.15

mm min

Measured from master pins and pads to slave pins and pads, shortest

distance through air

Minimum External Tracking (Creepage)

Field Power Domain to Master Domain

2.15

mm min

Measured from field power pins and pads to master pins and pads,

shortest distance path along body

Field Power Domain to Slave Domain

2.15

mm min

Measured from field power pins and pads to slave pins and pads, shortest

distance path along body

Master Domain to Slave Domain

2.15

mm min

Measured from master pins and pads to slave pins and pads, shortest

distance path along body

Minimum Internal Gap (Internal Clearance)

18

µm min

Insulation distance through insulation