Data Sheet

ADP1034

3-Channel Isolated Micropower Management Unit with Seven Digital Isolators and

Programmable Power Control

Rev. 0

DOCUMENT FEEDBACK

TECHNICAL SUPPORT

Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog

Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to

change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

FEATURES

►

Wide input supply voltage range: 4.5 V to 60 V

►

Integrated flyback power switch

►

Generates isolated, independent, resistor-programmable bipolar

outputs and factory-programmable buck output

►

►

►

►

86% typical efficiency at 2.61 W output power

►

through serial command

►

Uses a 1:1 ratio transformer for simplified transformer design

►

Adjustable switching frequency via SYNC input

►

Peak current limiting and overvoltage protection

►

Internal compensation and soft start control per regulator

►

Precision enable input

►

High speed, low propagation delay, SPI signal isolation channels

►

Three 100 kbps general-purpose isolated data channels

►

41-lead, 9 mm × 7 mm LFCSP form factor enables small overall

solution size

►

−40°C to +125°C operating junction temperature range

►

Safety and regulatory approvals (pending)

►

CISPR11 Class B radiated emission

►

UL recognition: 2500 V rms for 1 minute per UL 1577

►

CSA Component Acceptance Notice 5A

►

300 V rms basic insulation between slave, master, and field

power domains (IEC 61010-1, pending)

►

VDE certificate of conformity

►

DIN V VDE 0884-10 (VDE 0884-10):2006-12

►

APPLICATIONS

►

Industrial automation and process control

►

Instrumentation and data acquisition systems

►

Data and power isolation

TYPICAL APPLICATION CIRCUIT

Figure 1.

GENERAL DESCRIPTION

The ADP1034 is high performance, isolated micropower manage-

ment unit (PMU) that combines an isolated flyback dc-to-dc regu-

lator, an inverting buck boost dc-to-dc regulator, and a buck dc-to-

dc regulator, providing three isolated power rails. The ADP1034

includes four high speed serial peripheral interface (SPI) isolation

channels and three general-purpose isolators for channel to chan-

nel applications where low power dissipation and small solution size

are required.

Operating over an input voltage range of 4.5 V to 60 V, the

ADP1034 generates isolated output voltage ranges of 6 V to 28 V

that allows higher efficiency in system level applications.

By default, the ADP1034 flyback regulator operates at a 250 kHz

switching frequency, and the buck and inverting regulators operate

at 125 kHz. The ADP1034 can be driven by an external oscillator in

the range of 350 kHz to 750 kHz to ease noise filtering in sensitive

applications.

The digital isolators integrated in the ADP1034 use Analog Devices,

power and low radiated emissions. The ADP1034 is available in a

9 mm × 7 mm, 41-lead lead frame chip scale package (LFCSP)

and is rated for a −40°C to +125°C operating junction temperature

range.

Analog Devices is in the process of updating documentation to provide terminology and language that is culturally appropriate. This is a process

with a wide scope and will be phased in as quickly as possible. Thank you for your patience.