ST92F124 datasheet(249/429 Pages) STMICROELECTRONICS

249 / 429 page

249/429

ASYNCHRONOUS SERIAL COMMUNICATIONS INTERFACE (SCI-A)

ASYNCHRONOUS SERIAL COMMUNICATIONS INTERFACE (Cont’d)

EXTENDED RECEIVE PRESCALER DIVISION

R245 - Read/Write

Reset Value: 0000 0000 (00h)

Allows setting of the Extended Prescaler rate divi-

sion factor for the receive circuit.

Bits 7:1 = ERPR[7:0] 8-bit Extended Receive

Prescaler Register.

The extended Baud Rate Generator is activated

when a value different from 00h is stored in this

from the 16 divider (see Figure 119) is divided by

the binary factor set in the SCIERPR register (in

the range 1 to 255).

The extended Baud Rate Generator is not used af-

ter a reset.

EXTENDED TRANSMIT PRESCALER DIVISION

R246 - Read/Write

Reset Value:0000 0000 (00h)

Allows setting of the External Prescaler rate divi-

sion factor for the transmit circuit.

Bits 7:1 = ETPR[7:0] 8-bit Extended Transmit

Prescaler Register.

The extended Baud Rate Generator is activated

when a value different from 00h is stored in this

from the 16 divider (see Figure 119) is divided by

the binary factor set in the SCIETPR register (in

the range 1 to 255).

The extended Baud Rate Generator is not used af-

ter a reset.

10.6.6 Important Notes on SCI-A

Refer to Section 13.4 on page 413 and Section

13.5 on page 413.

ERPR7 ERPR6 ERPR5 ERPR4 ERPR3 ERPR2 ERPR1 ERPR0

ETPR7 ETPR6 ETPR5 ETPR4 ETPR3 ETPR2 ETPR1 ETPR0

ST92F124 数据表(PDF) 249 Page - STMicroelectronics

ST92F124 数据表(HTML) 249 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载