| 数据搜索系统,热门电子元器件搜索 |
|
ENC28J60-C/ML 数据表(PDF) 41 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
ENC28J60-C/ML 数据表(HTML) 41 Page - Microchip Technology |
|
41 / 96 page ![]() © 2006 Microchip Technology Inc. Preliminary DS39662B-page 39 ENC28J60 7.0 TRANSMITTING AND RECEIVING PACKETS 7.1 Transmitting Packets The MAC inside the ENC28J60 will automatically gener- ate the preamble and start-of-frame delimiter fields when transmitting. Additionally, the MAC can generate any padding (if needed) and the CRC if configured to do so. The host controller must generate and write all other frame fields into the buffer memory for transmission. Additionally, the ENC28J60 requires a single per packet control byte to precede the packet for transmission. The per packet control byte is organized as shown in Figure 7-1. Before transmitting packets, the MAC registers which alter the transmission characteristics should be initialized as documented in Section 6.0 “Initialization”. For an example of how the entire transmit packet and results will look in memory, see Figure 7-2. FIGURE 7-1: FORMAT FOR PER PACKET CONTROL BYTES — — — — PHUGEEN PPADEN PCRCEN POVERRIDE bit 7 bit 0 bit 7-4 Unused bit 3 PHUGEEN: Per Packet Huge Frame Enable bit When POVERRIDE = 1: 1 = The packet will be transmitted in whole 0 = The MAC will transmit up to the number of bytes specified by MAMXFL. If the packet is larger than MAMXFL, it will be aborted after MAMXFL is reached. When POVERRIDE = 0: This bit is ignored. bit 2 PPADEN: Per Packet Padding Enable bit When POVERRIDE = 1: 1 = The packet will be zero padded to 60 bytes if it is less than 60 bytes 0 = The packet will be trasmitted without adding any padding bytes When POVERRIDE = 0: This bit is ignored. bit 1 PCRCEN: Per Packet CRC Enable bit When POVERRIDE = 1: 1 = A valid CRC will be calculated and attached to the frame 0 = No CRC will be appended. The last 4 bytes of the frame will be checked for validity as a CRC. When POVERRIDE = 0: This bit is ignored. bit 0 POVERRIDE: Per Packet Override bit 1 = The values of PCRCEN, PPADEN and PHUGEEN will override the configuration defined by MACON3 0 = The values in MACON3 will be used to determine how the packet will be transmitted |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |