| 数据搜索系统,热门电子元器件搜索 |
|
CSG14K_CSG8K 数据表(PDF) 76 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
CSG14K_CSG8K 数据表(HTML) 76 Page - OSRAM GmbH |
|
76 / 114 page ![]() Document Feedback CSG14K_CSG8K Functional Description Datasheet • PUBLIC DS000571 • v2-01 • 2023-Feb-10 113 │ 75 Despite the naming of the L(ong) and S(hort) groups, it is allowed to have a shorter exposure time for the L group than for the S group. Dual exposure mode is also supported in Full External control mode. In this control mode, the rising edge of REQ_EXP starts the exposure of the L group and the falling edge of REQ_EXP starts the exposure of S. This behavior is illustrated in Figure 56. If DUAL_EXPOSURE is low, both groups are started with the rising edge of REQ_EXP. Minimal Frame Time Constraint The frame time has a minimum value requirement to guarantee the entire frame readout and exposure is completed successfully before a new frame starts. This minimum requirement is captured in the equation: Equation 6: ������������������������������������ > ������glob + ������������������������������ ������������������ℎ: ������������������������������ = ������������������������ ∙ (������������������������������ + ������������������������������������ + ������������������������������������) The components of this equation are: Figure 90: Minimal Frame Time Dependencies Component Description Equation tframe Target Frame time (= 1 / max frame rate) FRAME_TIME · TU tglob Length GLOB state GLOB_TIME · TU trow Row length ROW_LENGTH · tCLK_PIX Nfval Number of valid rows in frame sum(YWINenabled.SIZE) Ndummy Number of dummy rows in frame IMG.3: 3 Others: 7 Nstats Number of image statistics rows in frame STAT_NROF_HIST TU is time unit expressed in seconds, not to be confused with contents of register TIME_UNIT. The tread component corresponds to the length of the READOUT state used in section 7.2.6. In the external control modes, the same frame time equation should be respected to not interrupt the readout of active frames. The Ndummy component represents a number of dummy rows read out between the GLOB and READOUT phase. Depending on the configuration used, this number varies between 3 and 7. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |