| 数据搜索系统,热门电子元器件搜索 |
|
CSG14K_CSG8K 数据表(PDF) 34 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
CSG14K_CSG8K 数据表(HTML) 34 Page - OSRAM GmbH |
|
34 / 114 page ![]() Document Feedback CSG14K_CSG8K Functional Description Datasheet • PUBLIC DS000571 • v2-01 • 2023-Feb-10 113 │ 33 Figure 29: Register Categories Category Description - Registers without category can be changed at any time, but might directly influence the sensor execution. SYNC Registers are internally synchronized to start of frame (at the start of the GLOB state), so an entire frame is always read with the same SYNC configuration. This means that the registers may be updated at any time. CONTEXT Registers can only be changed in the non-active context (i.e. RW_CONTEXT differs from ACTIVE_CONTEXT). These register can also be changed under the same conditions as DC, if ACTIVE_CONTEXT is the same as RW_CONTEXT. DC Can only be changed when sensor is in IDLE state, or in soft reset state. RST Only to be changed when sensor is in soft reset state. RO Read-only register. All write operations are ignored. Reading from a register is always allowed. When reading registers of category ‘SYNC’, the last value that was written to the register is read. The value read may differ from the value that the sensor’s logic is currently using, as SYNC registers are frame-synchronized. Figure 30: Frame Sync Reg. Name Bank Addr Bits Def. Description DISABLE_FRAMESYNC 0 5 [0] 0 0: Enable 1: Disable PARAM_HOLD 0 4 [0] 0 0: Registers are frame synchronized 1: Registers are not frame synchronized The upload of 'SYNC' type registers can be constrained with the following registers: If DISABLE_FRAMESYNC is set to '1', frame synchronization is disabled. Any uploads will take effect immediately. Frame synchronization only happens if PARAM_HOLD is '0'. When uploading a bunch of SYNC-type registers together (for example, change a number of different YWIN settings), it is advised to set PARAM_HOLD to '1' during the entire upload. This prevents a frame from being started with only half of the required updates in case the frame start happened when the entire upload had not completed. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |