TMP86FS28DFG datasheet(167/272 Pages) TOSHIBA

167 / 272 page

Page 155

TMP86FS28DFG

11.3.2 Shift edge

The leading edge is used to transmit, and the trailing edge is used to receive.

11.3.2.1 Leading edge

Transmitted data are shifted on the leading edge of the serial clock (falling edge of the SCK pin input/

output).

11.3.2.2 Trailing edge

Received data are shifted on the trailing edge of the serial clock (rising edge of the SCK pin input/out-

put).

Figure 11-5 Shift edge

11.4 Number of bits to transfer

Either 4-bit or 8-bit serial transfer can be selected. When 4-bit serial transfer is selected, only the lower 4 bits of

the transmit/receive data buffer register are used. The upper 4 bits are cleared to “0” when receiving.

The data is transferred in sequence starting at the least significant bit (LSB).

11.5 Number of words to transfer

Up to 8 words consisting of 4 bits of data (4-bit serial transfer) or 8 bits (8-bit serial transfer) of data can be trans-

ferred continuously. The number of words to be transferred can be selected by SIOCR2<BUF>.

An INTSIO interrupt is generated when the specified number of words has been transferred. If the number of

words is to be changed during transfer, the serial interface must be stopped before making the change. The number of

words can be changed during automatic-wait operation of an internal clock. In this case, the serial interface is not

required to be stopped.

Bit 1

Bit 2

Bit 3

*321

3210

**32

***3

Bit 0

Shift register

Bit 1

Bit 0

Bit 2

Bit 3

0***

****

210*

10**

3210

(a) Leading edge

(b) Trailing edge

*; Don’t care

SO pin

SI pin

SCK pin

TMP86FS28DFG 数据表(PDF) 167 Page - Toshiba Semiconductor

TMP86FS28DFG 数据表(HTML) 167 Page - Toshiba Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载