| 数据搜索系统,热门电子元器件搜索 |
|
PAC1932/3/4 数据表(PDF) 30 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PAC1932/3/4 数据表(HTML) 30 Page - Microchip Technology |
|
30 / 62 page ![]() PAC1932/3/4 DS20005850C-page 30 2017-2018 Microchip Technology Inc. 5.6.4 READ BYTE The Read Byte protocol is used to read one byte of data from the registers, as shown in Table 5-6. If an invalid register address is specified, the slave will ACK its address but NACK (not acknowledge) the register address. The master will NACK the data received from the slave by holding the SMBus data line high after the eighth data bit has been sent. 5.6.5 SEND BYTE The Send Byte protocol is used to set the internal address register pointer to the correct address location. No data is transferred during the Send Byte protocol, as shown in Table 5-7. 5.6.6 RECEIVE BYTE The Receive Byte protocol is used to read data from a register when the internal register address pointer is known to be at the right location (e.g., set via Send Byte). This is shown in Table 5-8. When an ACK is received after the REGISTER DATA, then the address pointer automatically increments. When a NACK is received after the REGISTER DATA, then the address pointer stays at the same position. If the master wishes to continue clocking and read the next register, the master will ACK after the register data, instead of sending NACK followed by STOP. If some channels are deactivated, their data registers will be skipped by the auto-incrementing pointer. Alternatively, you may set bit 0 in Register 6-10 CHANNEL_DIS and SMBus (Address 1Ch) and the pointer will not skip the addresses associated with the inactive channels. The measurement data for these inactive channels will read FFh. TABLE 5-6: READ BYTE PROTOCOL START Slave Address WR ACK Register Address ACK START Slave Address RD ACK Register Data NACK STOP 1 0 YYYY_YYY 0 0 XXh 0 1 0 YYYY_YYY 1 0 XXh 1 0 1 TABLE 5-7: SEND BYTE PROTOCOL START Slave Address WR ACK Register Address ACK STOP 1 0 YYYY_YYY 0 0 XXh 0 0 1 TABLE 5-8: RECEIVE BYTE PROTOCOL START Slave Address RD ACK Register Data NACK STOP 1 0 YYYY_YYY 1 0 XXh 1 0 1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |