| 数据搜索系统,热门电子元器件搜索 |
|
ST52T400 数据表(PDF) 63 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST52T400 数据表(HTML) 63 Page - STMicroelectronics |
|
63 / 94 page ![]() ST52T400/T440/E440/T441 63/94 10 TRIAC/PWM DRIVER ST52x400/440/441 offers a peripheral able to generate a TROUT signal on PA0 pin (able to sup- ply up to 25 mA), to drive an external device, like a TRIAC, an IGBT or a Power MOS. A Triac/PWM driver can perform 3 different working modes according to REG_CONF10(3:2) bits, MODE (see Table 10.3): MODE = “00”: PWM MODE = “01": Burst Mode Triac Control (Thermal Regulations) MODE = “1x": Phase Angle Partialization Triac Control (Motor Control) The Triac/PWM Driver can be initialized by using a value fixed by a control algorithm, and stored in the Register File. The value is loaded in the TRIAC_COUNT register (Output Register 9) by using the LDPR instruction and it can be read by using the LDRI instruction addressing the Input Register 17. Figure 10.1 illustrates the internal structure of the Triac/PWM Driver. PWM Mode The PWM working mode selection can be obtained by setting REG_CONF10(3:2) bits, MODE, at “00" value. In this working mode, the peripheral provides a signal with a fixed period and a variable duty cycle on the TROUT pin. The PWM period can be generated starting from the internal master clock or an external clock sig- nal applied in MAIN1 pin. In both cases, the clock signal is divided by a 16- bit Prescaler, managed by REG_CONF8 and REG_CONF9 (Figure 10.2). At each period, the duty cycle is fixed by an 8-bit value loaded in the TRIAC_COUNT register (Out- put Register 9). The duty cycle is proportional to the value: loading 50% duty cycle is obtained, loading 0 the output will be low (off) during all the period, loading 255 will be high (on). By Using a 20 Mhz clock PWM frequencies in the range between 1.2 Hz to 78.4 Mhz may be obtained. Figure 10.1 TRIAC/PWM Driver Block Diagram PRESCALER 16 bit MAIN1 TRIACOUT PULSE GENERATOR Tck REG_CONF8 REG_CONF9 16 ÷2 PROGRAMMABLE COUNTER MCLK 8 REG_PERIPH_9 EXTCLK 50/60 Hz PRECLK POL Tck 23 4 5 6 7 01 REG_CONF10 MAIN2 TRIAC/PWM DRIVER CORE MCLK START MODE RESET |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |