| 数据搜索系统,热门电子元器件搜索 |
|
ST6369 数据表(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST6369 数据表(HTML) 44 Page - STMicroelectronics |
|
44 / 71 page ![]() 6-BIT PWM D/A CONVERTERS The D/A macrocell contains up to six PWM D/A outputs (31.25kHz repetition, DA0-DA5) with six bit resolution. Each D/A converter of ST6369 is composed by the following main blocks: - pre-divider - 6-bit counter - data latches and compare circuits The pre-divider uses the clock input frequency (8MHz typical) and its output clocks the 6-bit free- running counter. The data latched in the six regis- ters (E0H, E1H, E2H, E3H, E6H and E7H) control the six D/A outputs (DA0,1,2, 3, 4 and 5). When all zeros are loaded the relevant output is an high logic level; all 1’s correspond to a pulse with a 1/64 duty cycle and almost 100% zero level. The repetition frequency is 31.25KHz and is re- lated to the 8MHz clock frequency. Use of a differ- ent oscillator frequency will result in a different repetition frequency. All D/A outputs are open- drain with standard current drive capability and able to withstand up to 12V. DA0-DA5. These are the 6 bits of the PWM digital to analog converter. Undefined after reset. A/D COMPARATOR A/D INPUT, HSYNC/PC6 RESULT, VSYNC RESULT AND O0, O1 OUTPUTS The A/D macrocell contains an A/D comparator with five levels at intervals of 1V from 1V to 5V. The levels can all be lowered by 0.5V to effectively dou- ble the resolution. The A/D used to perform the AFC function (when high threshold is selected) has the following volt- age levels: 1,2,3,4 and 5V. Bits 0-2 of AFC result register (E4H address) will provide the result in bi- nary form (less than 1V is 000, greater than 5V is 101). If the application requires a greater resolution, the sensitivity can be doubled by clearing to zero bit 2 of the OUTPUTS control register, address E5H. In this case all levels are shifted lower by 0.5V. If the two results are now added within a software rou- tine then the A/D S-curve can be located within a resolution of 0.5V. The A/D input has high impedance able to with- stand up to 13V signals (input level tolerances ± 200mV absolute and ± 100mv relative to 5V). DA0, DA1, DA2, DA3, DA4, DA5 DA0 to DA5 Data/control Registers (E0H, E1H, E2H, E3H, E6H, E7H Write Only) D7 D6 D5 D4 D3 D2 D1 D0 Data Bit 0 Data Bit 1 Data Bit 2 Data Bit 3 Data Bit 4 Data Bit 5 Unused Unused Figure 50. DA0-DA5 Data/Control Registers Figure 51.6-bit PWM D/A Output Configuration Figure 52. A/D Inputs Configuration Diagram ® ST6369 40/67 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |