ST7263 datasheet(9/109 Pages) STMICROELECTRONICS

部件名	ST7263

功能描述	LOW SPEED USB 8-BIT MCU FAMILY with up to 16K MEMORY, up to 512 BYTES RAM, 8-BIT ADC, WDG, TIMER, SCI & I2C

PDF	109 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

9 / 109 page

ST7263

9/109

1.3 EXTERNAL CONNECTIONS

The following figure shows the recommended ex-

ternal connections for the device.

The VPP pin is only used for programming OTP

and EPROM devices and must be tied to ground in

user mode.

The 10 nF and 0.1 µF decoupling capacitors on

the power supply lines are a suggested EMC per-

formance/cost tradeoff.

The external reset network is intended to protect

the device against parasitic resets, especially in

noisy environments.

Unused I/Os should be tied high to avoid any un-

necessary power consumption on floating lines.

An alternative solution is to program the unused

ports as inputs with pull-up.

Figure 4. Recommended External Connections

VPP

VDD

VSS

OSCIN

OSCOUT

RESET

VDD

0.1µF

See

Clocks

Section

VDD

0.1µF

EXTERNAL RESET CIRCUIT

Or configure unused I/O ports

Unused I/O

10nF

4.7K

10K

by software as input with pull-up

VDD

Detector (LVD) is used

Optional if Low Voltage

ST7263 数据表(PDF) 9 Page - STMicroelectronics

ST7263 数据表(HTML) 9 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载