| 数据搜索系统,热门电子元器件搜索 |
|
M32C/86 数据表(PDF) 109 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M32C/86 数据表(HTML) 109 Page - Renesas Technology Corp |
|
109 / 505 page ![]() Page 86 9 7 4 f o 5 0 0 2 , 8 0 . p e S 0 0 . 1 . v e R 0 0 1 0 - 4 0 2 0 B 9 0 J E R 9. Clock Generation Circuit ) T 6 8 / C 2 3 M , 6 8 / C 2 3 M ( p u o r G 6 8 / C 2 3 M 0 1 1 1 0 (3) 0 0 1 002, 102, 112, Outputs BCLK Outputs "L" (not P53) Outputs fc Outputs f8 0 (3) 0 1 0 11 0 (3) 0 1 Outputs f32 Outputs ALE 1 0 (3) PM07 Bit CM01 Bit CM00 Bit PM14 Bit CLKOUT Pin Function PM15 Bit PM0 Register(1) CM0 Register(2) PM1 Register(1) PM07 Bit CM01 Bit CM00 Bit CLKOUT Pin Function 1 1 1 0 0 1 1 P53 I/O port Outputs fc Outputs f8 Outputs f32 PM0 Register (1) CM0 Register (2) 0 1 0 1 9.3.3 fC32 fC32 is the sub clock divided by 32. fC32 is used as a count source for the timers A and B. fC32 is available when the sub clock is running. 9.3.4 fCAN fCAN has the same frequency as the main clock. It is a clock for the CAN module only. 9.4 Clock Output Function The CLKOUT pin outputs fC, f8 or f32. In memory expansion mode or microprocessor mode, a clock having the same frequency as the CPU clock can be output from the BCLK pin as BCLK. Table 9.5 lists CLKOUT pin function in single-chip mode. Table 9.6 lists CLKOUT pin function in memory expansion mode and microprocessor mode. Table 9.5 CLKOUT Pin in Single-Chip Mode - : Can be set to either "0" or "1" NOTES: 1. Rewrite the PM0 register after the PRC1 bit in the PRCR register is set to "1" (write enable). 2. Rewrite the CM0 register after the PRC0 bit in the PRCR register is set to "1" (write enable). Table 9.6 CLKOUT Pin in Memory Expansion Mode and Microprocessor Mode - : Can be set to either "0" or "1" NOTES: 1. Rewrite the PM1 and PM0 registers after the PRC1 bit in the PRCR register is set to "1" (write enable). 2. Rewrite the CM0 register after the PRC0 bit in the PRCR register is set to "1" (write enable). 3. When the PM07 bit is set to "0" (selected in the CM01 and CM00 bits) or the PM15 and PM14 bits are set to "012" (P53/BCLK), set the CM01 and CM00 bits to "002" (I/O port P53). 4. M32C/86T cannot be used in memory expansion mode and microprocessor mode. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |