H8SLASH3028F datasheet(34/923 Pages) RENESAS

34 / 923 page

Rev. 2.00, 09/03, page 4 of 890

Feature

Description

8-bit timer,

4 channels

• 8-bit up-counter (external event count capability)

• Two time constant registers

• Two channels can be connected

Programmable

timing pattern

controller (TPC)

• Maximum 16-bit pulse output, using 16-bit timer as time base

• Up to four 4-bit pulse output groups (or one 16-bit group, or two 8-bit groups)

• Non-overlap mode available

• Output data can be transferred by DMAC

Watchdog

timer (WDT),

1 channel

• Reset signal can be generated by overflow

• Reset signal can be output externally (not in the F-ZTAT version)

• Usable as an interval timer

Serial

communication

interface (SCI),

3 channels

• Selection of asynchronous or synchronous mode

• Full duplex: can transmit and receive simultaneously

• On-chip baud-rate generator

• Smart card interface functions added

A/D converter

• Resolution: 10 bits

• Eight channels, with selection of single or scan mode

• Variable analog conversion voltage range

• Sample-and-hold function

• A/D conversion can be started by an external trigger or 8-bit timer compare-

match

• DMAC can be activated by an A/D conversion end interrupt

D/A converter

• Resolution: 8 bits

• Two channels

• D/A outputs can be sustained in software standby mode

I/O ports

• 70 input/output pins

• 9 input-only pins

H8/3028F 数据表(PDF) 34 Page - Renesas Technology Corp

H8/3028F 数据表(HTML) 34 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载