| 数据搜索系统,热门电子元器件搜索 |
|
PCF8811U/2DA/1 数据表(PDF) 39 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF8811U/2DA/1 数据表(HTML) 39 Page - NXP Semiconductors |
|
39 / 81 page ![]() xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx [1] X = value without meaning. [2] NXP Semiconductors recommends that the extended command set be used. [3] D7 = MSB. [4] Commands only available with the extended command set, EXT = 1. If EXT = 0 these commands have no effect. [5] When the icon mode is enabled the set initial display line 0 ≤ L ≤ 78. [6] When the icon mode is enabled the set initial row line 0 ≤ C ≤ 78. [7] Commands only used for the basic command set EXT = 0. If EXT = 1 these commands have no effect. It must be checked, when setting VOP in the basic command set that it is followed by another command. [8] The programming of VOP in the basic command set must be done in the following order: a) VPR[5:0] VOP setting 0 0 0 1 0 0 0 0 0 0 1 set VOP[7][8] 00 0 X X VPR5 VPR4 VPR3 VPR2 VPR1 VPR0 0 0 0 0 0100 VOFF2 VOFF1 VOFF0 offset for VOP[7][8] 1 0 0 1 0 0 0 0 0 0 1 set VOP[4] 10 0 VPR7 VPR6 VPR5 VPR4 VPR3 VPR2 VPR1 VPR0 Power control X 0 0 0 0 1 0 1 PC1 PC0 1 switch HVgen on/off HVgen stages 0 0 0 0 1 1 0 0 1 S1 S0 set multiplication factor 1 0 0 0 1100 S2 S1 S0 set multiplication factor[4] FR 1 0 0 0 00111 FR1 FR0 set frame rate frequency[4] TC[9] 1 0 0 0 0111 TC2 TC1 TC0 set temperature coefficient[4] Bias system 0 0 0 0 1 0 1 0 BS2 BS1 BS0 set bias system[10] Manual p value (p = 4) 1 0 0 0 0 0 1 1 0 1 MP set manual p value[4][11] Power-save on X 0 0 1 0 1 0 1 0 0 1 Power-save mode Power-save off X 0 0 1 1 1 0 0 0 0 1 exit Power-save mode Internal oscillator X 0 0 1 0 1 0 1 0 1 OS switch internal oscillator on/off Internal oscillator 1 0 0 1 1 1 0 0 1 1 EC enable or disable the internal or external oscillator[4] Enter CALMM mode X 0 0 1 0 0 0 0 0 1 0 enter CALMM mode Reserved X 0 0 0 0 1 0 1 X X 0 reserved Reserved X 0 0 0 1 1 1 X X X X reserved Test X 0 0 1 1 1 1 X X X X do not use; reserved for testing Table 10. Instruction set[1] …continued Instruction Pad Command byte Description EXT[2] D/C R/W/WR DB7[3] DB6 DB5 DB4 DB3 DB2 DB1 DB0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |