CS9211 datasheet(20/62 Pages) NSC

20 / 62 page

www.national.com

Revision 2.1

Functional Description (Continued)

Table 3-2. Panel Mode Selection Bits

Bit

Name

Description

Offset 404h-407h

Panel Timing Register 2 (R/W)

Reset Value = 00000000h

21:20

DSTN_TFT

Panel Type Select: Selects panel type. The selection of the panel type in conjunction with the

PIX_OUT (bits [18:16]) setting determines how pixel data is mapped on the output LD/UD pins. This bit

also determines the generation of SHFCLK and other panel timing interface signals.

00 = SSTN/DSTN panel

01 = TFT panel

10 = Reserved

11 = Reserved

COLOR_MONO

Color/Mono Select: Selects color or monochrome LCD panel. 0 = Color; 1 = Monochrome.

18:16

PIX_OUT

Pixel Output Format: These bits define the pixel output format. The selection of the pixel output format

in conjunction with the panel type selection (bits [21:20]) and the color/monochrome selection (bits

[19]) determines how the pixel data is formatted before being sent on to the LD/UD pins. These settings

also determine the SHFCLK period for the specific panel.

000 = 8-bit DSTN panel or up to 24-bit TFT panel with one pixel per clock.

Option 1: Mono 8-bit DSTN (bits [21:20] = 00 and bit 19 = 1)

(Color 8-bit DSTN is not supported)

SHFCLK = 1/4 of DOTCLK

Option 2: Color TFT with 1 pixel/clock (bits [21:20] = 01 and bit 19 = 0)

SHFCLK = DOTCLK

001 = 16-bit DSTN panel or 18/24-bit TFT XGA panel with two pixels per clock.

Option 1: Color 16-bit DSTN (bits [21:20] = 00 and bit 19 = 0)

SHFCLK = 1/(3:2:3) of DOTCLK

Option 2: Mono 16-bit DSTN (bits [21:20] = 00 and bit 19 = 1)

SHFCLK = 1/8 of DOTCLK

Option 3: Color 18/24 bit TFT (bits [21:20] = 01 and bit 19 = 0)

SHFCLK = 1/2 of DOTCLK

010 = 24-bit DSTN panel

Color 24-bit DSTN (bits [21:20] = 00 and bit 19 = 0)

(Mono 24-bit DSTN is not supported)

SHFCLK = 1/4 of DOTCLK

011 = 8-bit SSTN panel

Color 8-bit SSTN (bits [21:20] = 00 and bit 19 = 0)

SHFCLK = 1/(3:2:3) of DOTCLK

100, 101, 110, and 111 = Reserved

Table 3-3. Panel Interface Pin Function Selection Bits

Bit

Name

Description

Offset 404h-407h

Panel Timing Register 2 (R/W)

Reset Value = 00000000h

LP_HSYNC_SEL

LP/HSYNC Select: Selects the function of LP/HSYNC (pin 31). Set this bit based on the panel type

connected. For DSTN or SSTN panels, set this bit to 0. For TFT panels, set this bit to 1.

0 = LP (output for DSTN/SSTN panel).

1 = HSYNC (output for TFT panel).

LDE_SEL

LDE Select: Always set this bit to 1.

0= Reserved

1 = LDE (output for TFT panel).

FLM_VSYNC_

SEL

FLM/VSYNC Select: Selects function of FLM/VSYNC (pin 33). Set this bit based on the panel type con-

nected. For DSTN or SSTN panels, set this bit to 0. For TFT panels, set this bit to 1.

0 = FLM (output for DSTN/SSTN panel).

1 = VSYNC (output for TFT panel).

CS9211 数据表(PDF) 20 Page - National Semiconductor (TI)

CS9211 数据表(HTML) 20 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

数据表下载