| 数据搜索系统,热门电子元器件搜索 |
|
COP8-REF-AM 数据表(PDF) 28 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
COP8-REF-AM 数据表(HTML) 28 Page - National Semiconductor (TI) |
|
28 / 83 page ![]() 11.0 In-System Programming (Continued) TABLE 11. User ISP/Virtual E 2 Entry Points Command/ Label Function Command Entry Point Parameters Return Data cpgerase Page Erase 0x17 Register ISPADHI is loaded by the user with the high byte of the address. Register ISPADLO is loaded by the user with the low byte of the address. N/A (A page of memory beginning at ISPADHI, ISPADLO will be erased) cmserase Mass Erase 0x1A Accumulator A contains the confirmation key 0x55. N/A (The entire Flash Memory will be erased) creadbf Read Byte 0x11 Register ISPADHI is loaded by the user with the high byte of the address. Register ISPADLO is loaded by the user with the low byte of the address. Data Byte in Register ISPRD. cblockr Block Read 0x26 Register ISPADHI is loaded by the user with the high byte of the address. Register ISPADLO is loaded by the user with the low byte of the address. X pointer contains the beginning RAM address where the result(s) will be returned. Register BYTECOUNTLO contains the number of n bytes to read (0 ≤ n ≤ 255). It is up to the user to setup the segment register. n Data Bytes, Data will be returned beginning at a location pointed to by the RAM address in X. cwritebf Write Byte 0x14 Register ISPADHI is loaded by the user with the high byte of the address. Register ISPADLO is loaded by the user with the low byte of the address. Register ISPWR contains the Data Byte to be written. N/A cblockw Block Write 0x23 Register ISPADHI is loaded by the user with the high byte of the address. Register ISPADLO is loaded by the user with the low byte of the address. Register BYTECOUNTLO contains the number of n bytes to write (0 ≤ n ≤ 16). The combination of the BYTECOUNTLO and the ISPADLO registers must be set such that the operation will not cross a 64 byte boundary. X pointer contains the beginning RAM address of the data to be written. It is up to the user to setup the segment register. N/A exit EXIT 0x62 N/A N/A (Device will Reset) uwisp MICROWIRE/ PLUS ISP Start 0x00 N/A N/A (Divice will be in MICROWIRE/PLUS ISP Mode. Must be terminated by MICROWIRE/PLUS ISP EXIT command which will Reset the device) www.national.com 28 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |