LSM9DS1 datasheet(65/72 Pages) STMICROELECTRONICS

65 / 72 page

DocID025715 Rev 3

65/72

LSM9DS1

Magnetometer register description

Table 117. System operating mode selection

8.8

CTRL_REG4_M (23h)

Table 120. Z-axis operative mode selection

8.9

CTRL_REG5_M (24h)

MD1

MD0

Mode

Continuous-conversion mode

Single-conversion mode

Power-down mode

Table 118. CTRL_REG4_M register

0(1)

1. These bits must be set to ‘0’ for the correct operation of the device

0(1)

OMZ1

OMZ0

BLE

0(1)

Table 119. CTRL_REG4_M register description

OMZ[1:0]

Z-axis operative mode selection.

Default value: 00. Refer to Table 120.

BLE

Big/Little Endian data selection. Default value: 0

(0: data LSb at lower address; 1: data MSb at lower address)

OMZ1

OMZ0

Operative mode for Z-axis

Low-power mode

Medium-performance mode

High-performance mode

Ultra-high performance mode

Table 121. CTRL_REG5_M register

FAST_READ

BDU

0(1)

1. These bits must be set to ‘0’ for the correct operation of the device.

0(1)

Table 122. CTRL_REG5_M register description

FAST_READ

FAST_READ allows reading the high part of DATA OUT only in order to increase

reading efficiency. Default value: 0

(0: FAST_READ disabled; 1: FAST_READ enabled)

BDU

Block data update for magnetic data. Default value: 0

(0: continuous update; 1: output registers not updated until MSB and LSB have

been read)

LSM9DS1 数据表(PDF) 65 Page - STMicroelectronics

LSM9DS1 数据表(HTML) 65 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

数据表下载

链接网址

LSM9DS1 数据表(PDF) 65 Page - STMicroelectronics

LSM9DS1 数据表(HTML) 65 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

数据表 下载

链接网址

数据表下载