| 数据搜索系统,热门电子元器件搜索 |
|
MCP47FVB01 数据表(PDF) 38 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP47FVB01 数据表(HTML) 38 Page - Microchip Technology |
|
38 / 92 page ![]() MCP47FVBXX DS20005405A-page 38 2015 Microchip Technology Inc. 5.1 Resistor Ladder The Resistor Ladder is a digital potentiometer with the B Terminal internally grounded and the A Terminal connected to the selected reference voltage (see Figure 5-2). The volatile DAC register controls the wiper position. The wiper voltage (VW) is proportional to the DAC register value divided by the number of resis- tor elements (RS) in the ladder (256, 1024 or 4096) related to the VRL voltage. The output of the resistor network will drive the input of an output buffer. The Resistor Network is made up of these three parts: • Resistor Ladder (string of RS elements) • Wiper switches • DAC register decode The resistor ladder (RRL) has a typical impedance of approximately 140 k . This resistor ladder resistance (RRL) may vary from device to device up to ±20%. Since this is a voltage divider configuration, the actual RRL resistance does not affect the output given a fixed voltage at VRL. Equation 5-1 shows the calculation for the step resistance. If the unbuffered VREF pin is used as the VRL voltage source, this voltage source should have a low output impedance. When the DAC is powered-down, the resistor ladder is disconnected from the selected reference voltage. FIGURE 5-2: Resistor Ladder Model Block Diagram. EQUATION 5-1: RS CALCULATION Note: The maximum wiper position is 2n –1, while the number of resistors in the resistor ladder is 2n. This means that when the DAC register is at full scale, there is one resistor element (RS) between the wiper and the VRL voltage. RS(2n) RS(2n - 1) RS(2n - 2) RS(1) 2n - 1 2n - 2 1 0 RRL VRL VW DAC register PD1:PD0 Analog Mux RW (1) RW (1) RW (1) RW (1) Where: # Resistors in R-Ladder = 256 (MCP47FVB0X) 1024 (MCP47FVB1X) 4096 (MCP47FVB2X) V W DAC Register Value # Resistor in Resistor Ladder ----------------------------------------------------------------------V RL = Note 1: The analog switch resistance (RW) does not affect performance due to the voltage divider configuration. R S R RL 256 ------------- = R S R RL 1024 ---------------- = 8-bit Device 10-bit Device R S R RL 4096 ---------------- = 12-bit Device |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |