| 数据搜索系统,热门电子元器件搜索 |
|
AM2434...ALV 数据表(PDF) 252 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
AM2434...ALV 数据表(HTML) 252 Page - Texas Instruments |
|
252 / 280 page ![]() • Compliant with Philips I2C specification version 2.1 • Supported Speeds: – Standard mode (up to 100 K bits/s) – Fast mode (up to 400 K bits/s) – High-speed mode (up to 3.4 M bits/s), I2C0 and MCU_I2C0 only • Multi-controller transmitter and target receiver mode • Multi-controller receiver and target transmitter mode • Combined controller transmit/receive and receive/transmit modes • 7-bit and 10-bit device addressing modes • Built-in 32-byte FIFO for buffered read or write • Programmable multi-target channel (responds to 4 separates addresses) • Programmable clock generation • Support for asynchronous wake-up • One interrupt line For more information, see Inter-Integrated Circuit (I2C) Interface section in Peripherals chapter in the device TRM. 8.4.2.12 MCAN The Controller Area Network (CAN) is a serial communications protocol which efficiently supports distributed real-time control with a high level of security. CAN has high immunity to electrical interference and the ability to self-diagnose and repair data errors. In a CAN network, many short messages are broadcast to the entire network, which provides for data consistency in every node of the system. The MCAN module supports both classic CAN and CAN FD (CAN with Flexible Data-Rate) specifications. CAN FD feature allows high throughput and increased payload per data frame. The classic CAN and CAN FD devices can coexist on the same network without any conflict. The device supports 2 MCAN modules For more information, see Modular Controller Area Network (MCAN) section in Peripherals chapter in the device TRM. 8.4.2.13 MCRC Controller VBUSM CRC controller is a module which is used to perform CRC (Cyclic Redundancy Check) to verify the integrity of a memory system. A signature representing the contents of the memory is obtained when the contents of the memory are read into MCRC Controller. The responsibility of MCRC controller is to calculate the signature for a set of data and then compare the calculated signature value against a pre-determined good signature value. MCRC controller provides four channels to perform CRC calculation on multiple memories in parallel and can be used on any memory system. Channel 1 can also be put into data trace mode, where MCRC controller compresses each data being read through CPU read data bus. For more information, see MCRC Controller section in Interprocessor Communication chapter in the device TRM. 8.4.2.14 MCSPI The MCSPI module is a multichannel transmit/receive, controller/peripheral synchronous serial bus. There are total of seven MCSPI modules in the device. For more information, see Multichannel Serial Peripheral Interface (MCSPI) section in Peripherals chapter in the device TRM. 8.4.2.15 MMCSD There are two Multi-Media Card/Secure Digital (MMCSD) modules inside the device - MMCSD0 and MMCSD1. Each MMCSD module includes one MMCSD Host Controller, where MMCSD0 is associated with MMC0 and MMCSD1 is associated with MMC1. The MMCSD Host Controller supports: AM2434, AM2432, AM2431 SPRSP65D – APRIL 2021 – REVISED AUGUST 2022 www.ti.com 252 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: AM2434 AM2432 AM2431 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |