STM32F405 datasheet(112/204 Pages) STMICROELECTRONICS

112 / 204 page

Electrical characteristics

STM32F405xx, STM32F407xx

112/203

DS8626 Rev 9

Electromagnetic Interference (EMI)

The electromagnetic field emitted by the device are monitored while a simple application,

executing EEMBC? code, is running. This emission test is compliant with SAE IEC61967-2

standard which specifies the test board and the pin loading.

5.3.14

Absolute maximum ratings (electrical sensitivity)

Stresses above the absolute maximum ratings listed in Table 11: Voltage characteristics,

Table 12: Current characteristics, and Table 13: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and the functional operation

of the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability. Device mission profile (application conditions)

is compliant with JEDEC JESD47 Qualification Standard, extended mission profiles are

available on demand.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts × (n+1) supply pins). This test

conforms to the JESD22-A114/C101 standard.

Table 44. EMI characteristics

Symbol

Parameter

Conditions

Monitored

frequency band

Max vs.

[fHSE/fCPU]

Unit

25/168 MHz

SEMI

Peak level

VDD = 3.3 V, TA = 25 °C, LQFP176

package, conforming to SAE J1752/3

EEMBC, code running from Flash with

ART accelerator enabled

0.1 to 30 MHz

dBµV

30 to 130 MHz

130 MHz to 1GHz

SAE EMI Level

VDD = 3.3 V, TA = 25 °C, LQFP176

package, conforming to SAE J1752/3

EEMBC, code running from Flash with

ART accelerator and PLL spread

spectrum enabled

0.1 to 30 MHz

dBµV

30 to 130 MHz

130 MHz to 1GHz

SAE EMI level

3.5

Table 45. ESD absolute maximum ratings

Symbol

Ratings

Conditions

Class

Maximum

value(1)

Unit

VESD(HBM)

Electrostatic discharge

voltage (human body

model)

TA = +25 °C conforming to JESD22-A114

2000(2)

VESD(CDM)

Electrostatic discharge

voltage (charge device

model)

TA = +25 °C conforming to

ANSI/ESD STM5.3.1

500

1. Guaranteed by characterization.

STM32F405 数据表(PDF) 112 Page - STMicroelectronics

STM32F405 数据表(HTML) 112 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载