| 数据搜索系统,热门电子元器件搜索 |
|
TMP92FD54AI 数据表(PDF) 17 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP92FD54AI 数据表(HTML) 17 Page - Toshiba Semiconductor |
|
17 / 84 page ![]() 2006-01-27 92FD54AI-17 TMP92FD54AI User Boot Mode (1-A) Example procedure in which the rewrite routine is stored in the internal flash memory (Step 1) First, the conditions (e.g. the pin status) under which the program will enter User Boot Mode must be set and the I/O bus which the program will use to transfer data must be selected. Then a circuit must be designed and a corresponding program written. Before mounting this device on the board, the following four programs must be written into one of the blocks of the flash memory using a programmer or similar device. (a) Mode judgment routine: code to determine when rewriting of the device will commence (b) Flash rewrite routine: code to read the rewrite data from an external source and then rewrite the flash memory (c) Copy routine-1: code to copy (a) to (d) into the internal RAM or to external memory (d) Copy routine-2: code to copy (a) to (d) to the flash memory from the internal RAM or the external memory. (Step 2) The following explanation of the proceeding step assumes that the routines described above have been included in the Reset-processing program. After a Reset the Reset-processing program must first determine whether or not the device should enter User Boot Mode. If the condition for entering User Boot Mode is true, the program must put the device into User Boot Mode, the mode in which the flash memory can be rewritten. (Once the device has entered User Boot Mode, no interrupts ⎯ not even NMIs ⎯ should be used.) (TMP92FD54AI) Flash memory RAM [Reset-processing program] Old user application program (Controller) New user application program (I/O) (a) Mode judgment routine (b) Flash rewrite routine (c) Copy routine-1 (d) Copy routine-2 (c) Copy routine (TMP92FD54AI) Flash memory RAM [Reset-processing program] Old user application program (Controller) New user application program (I/O) 0 → 1 RESET Condition for determining whether or not the device should be put into User Boot Mode (set by the user) (a) Mode judgment routine (b) Flash rewrite routine (c) Copy routine-1 (d) Copy routine-2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |