| 数据搜索系统,热门电子元器件搜索 |
|
PIC16F1507-E/SS. 数据表(PDF) 181 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F1507-E/SS. 数据表(HTML) 181 Page - Microchip Technology |
|
181 / 278 page ![]() 2011-2015 Microchip Technology Inc. DS40001586D-page 181 PIC16(L)F1507 22.8 Dead-Band Uncertainty When the rising and falling edges of the input source triggers the dead-band counters, the input may be asyn- chronous. This will create some uncertainty in the dead- band time delay. The maximum uncertainty is equal to one CWG clock period. Refer to Equation 22-1 for more detail. EQUATION 22-1: DEAD-BAND UNCERTAINTY 22.9 Auto-Shutdown Control Auto-shutdown is a method to immediately override the CWG output levels with specific overrides that allow for safe shutdown of the circuit. The shutdown state can be either cleared automatically or held until cleared by software. 22.9.1 SHUTDOWN The shutdown state can be entered by either of the following two methods: • Software generated • External Input 22.9.1.1 Software Generated Shutdown Setting the GxASE bit of the CWGxCON2 register will force the CWG into the shutdown state. When auto-restart is disabled, the shutdown state will persist as long as the GxASE bit is set. When auto-restart is enabled, the GxASE bit will clear automatically and resume operation on the next rising edge event. See Figure 22-6. 22.9.1.2 External Input Source External shutdown inputs provide the fastest way to safely suspend CWG operation in the event of a Fault condition. When any of the selected shutdown inputs goes active, the CWG outputs will immediately go to the selected override levels without software delay. Any combination of two input sources can be selected to cause a shutdown condition. The sources are: • CLC2 – LC2_out •CWG1FLT Shutdown inputs are selected in the CWGxCON2 register. (Register 22-3). TDEADBAND_UNCERTAINTY 1 Fcwg_clock ----------------------------- = Therefore: Fcwg_clock 16 MHz = 1 16 MHz ------------------- = 62.5ns = TDEADBAND_UNCERTAINTY 1 Fcwg_clock ----------------------------- = Example: Note: Shutdown inputs are level sensitive, not edge sensitive. The shutdown state can- not be cleared, except by disabling auto- shutdown, as long as the shutdown input level persists. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |