| 数据搜索系统,热门电子元器件搜索 |
|
ANT-2.4-CW-RCL-RPS 数据表(PDF) 37 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
ANT-2.4-CW-RCL-RPS 数据表(HTML) 37 Page - Microchip Technology |
|
37 / 73 page ![]() WINCS02IC and WINCS02 Family Electrical Specifications Data Sheet © 2024-2025 Microchip Technology Inc. and its subsidiaries DS70005577B - 37 Table 3-15. WINCS02IC Transmitter Performance Characteristics (continued) RF Characteristics Standard Operating Conditions: VDD=VDDIO= 3.0V to 3.6V (unless otherwise stated) Operating Temperature: -40°C ≤ TA ≤ +85°C for Industrial -40°C ≤ TA ≤ +105°C for V-temp Param. No. Characteristics Description(8) Min. Typ(3) Max. Units WF_TX_4 Output power(1)(2) 802.11n (Bandwidth at 20 MHz) MCS 0 — 18 — dBm MCS 1 — 18 — MCS 2 — 18 — MCS 3 — 17.5 — MCS 4 — 17.5 — MCS 5 — 17 — MCS 6 — 17 — MCS 7(9) — 17 — WF_TX_5 Transmit Power Control (TPC) accuracy — — ±2(2) — dB WF_TX_6 Harmonic output power (Radiated, Regulatory mode) 2nd — 42 74(7) dBuV/m 3rd — Below noise floor 74(7) Notes: 1. Measured at IEEE® 802.11 specification compliant EVM/Spectral mask 2. Measured after RF matching network (assume 50Ω impedance) 3. RF performance is ensured at 3.3V, 25°C, with a 2-3 dB change at boundary conditions. 4. With respect to TX power, different (higher/lower) RF output power settings can be used for specific antennas and/or enclosures, in which case, re-certification can be required. Program the custom gain table to control the transmit power using the MCHPRT3 tool. 5. The availability of some specific channels and/or operational frequency bands are country-dependent and must be programmed in the host product at the factory to match the intended destination. Regulatory bodies prohibit exposing the settings to the end user. This requirement needs to be taken care of via host implementation. 6. The host product manufacturer must ensure that the RF behavior adheres to the certification (for example, FCC, ISED) requirements when the module is installed in the final host product. 7. FCC Radiated Emission limits (Restricted Band) 8. This parameter is characterized but not tested in manufacturing. 9. This parameter is characterized and tested in manufacturing. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |