ANT-2.4-CW-RCL-RPS datasheet(62/73 Pages) MICROCHIP

62 / 73 page

WINCS02IC and WINCS02 Family

Appendix A: Regulatory Approval

Data Sheet

DS70005577B - 62

– PMN:Wireless MCU Module with IEEE®802.11 b/g/n

• Europe/CE

• Great Britain/UKCA

• Japan/MIC: 020-240380

• Korea/KCC: R-R-mcp-WIXCS02

• Taiwan/NCC: CCAN24Y11111T0

5.1

United States

The WINCS02PC/WINCS02PE/WINCS02UC/WINCS02UE Modules have received Federal

Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional

Radiators” single-modular approval in accordance with Part 15.212 Modular Transmitter approval.

Single-modular transmitter approval is defined as a complete RF transmission sub-assembly,

designed to be incorporated into another device, that must demonstrate compliance with FCC

rules and policies independent of any host. A transmitter with a modular grant can be installed

in different end-use products (referred to as a host, host product or host device) by the grantee

or other equipment manufacturer, then the host product may not require additional testing or

equipment authorization for the transmitter function provided by that specific module or limited

module device.

The user must comply with all of the instructions provided by the Grantee, which indicate

installation and/or operating conditions necessary for compliance.

A host product itself is required to comply with all other applicable FCC equipment authorization

regulations, requirements, and equipment functions that are not associated with the transmitter

module portion. For example, compliance must be demonstrated: to regulations for other

transmitter components within a host product; to requirements for unintentional radiators (Part

15 Subpart B), such as digital devices, computer peripherals, radio receivers, etc.; and to additional

authorization requirements for the non-transmitter functions on the transmitter module (i.e.,

Suppliers Declaration of Conformity (SDoC) or certification) as appropriate (e.g., Bluetooth and Wi-Fi

transmitter modules may also contain digital logic functions).

5.1.1

Labeling and User Information Requirements

The WINCS02PC/WINCS02PE/WINCS02UC/WINCS02UE Modules have been labeled with its own FCC

ID number, and if the FCC ID is not visible when the module is installed inside another device, then

the outside of the finished product into which the module is installed must display a label referring

to the enclosed module. This exterior label must use the following wording:

For the WINCS02PC/PE Module

Contains Transmitter Module FCC ID: 2ADHKWIXCS02

Contains FCC ID: 2ADHKWIXCS02

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

For the WINCS02UC/UE Module

Contains Transmitter Module FCC ID: 2ADHKWIXCS02U

Contains FCC ID: 2ADHKWIXCS02U

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

The user's manual for the finished product must include the following statement:

ANT-2.4-CW-RCL-RPS 数据表(PDF) 62 Page - Microchip Technology

ANT-2.4-CW-RCL-RPS 数据表(HTML) 62 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

数据表下载