H8SLASH3028F datasheet(645/923 Pages) RENESAS

645 / 923 page

Rev. 2.00, 09/03, page 615 of 890

• If the entry in the interrupt vector table has not been programmed yet, interrupt

exception handling will not be executed correctly.

18.10 Flash Memory PROM Mode

The H8/3028F-ZTAT has a PROM mode as well as the on-board programming modes for

programming and erasing flash memory. In PROM mode, the on-chip ROM can be freely

programmed using a general-purpose PROM writer that supports the Renesas Technology

microcomputer device type with 256-kbyte on-chip flash memory.

18.10.1 Socket Adapters and Memory Map

In PROM mode using a PROM writer, memory reading (verification) and writing and flash

memory initialization (total erasure) can be performed. For these operations, a special socket

adapter is mounted in the PROM writer. The socket adapter product codes are given in table

18.10. In the H8/3028F-ZTAT PROM mode, only the socket adapters shown in this table should

be used.

Table 18.10 H8/3028F-ZTAT Socket Adapter Product Codes

Product Code

Package

Socket Adapter

Product Code

Manufacturer

HD64F3028F

100-pin QFP (FP-100B)

ME3024ESHF1H

HD64F3028TE

100-pin TQFP (TFP-100B)

ME3024ESNF1H

MINATO

ELECTRONICS INC.

HD64F3028F

100-pin QFP (FP-100B)

HF302BQ100D4001

DATA I/O JAPAN CO.

HD64F3028TE

100-pin TQFP (TFP-100B)

HF302BT100D4001

Figure 18.15 shows the memory map in PROM mode.

H8/3028F-ZTAT

H'000000

H'05FFFF

H'00000

H'5FFFF

MCU mode

PROM mode

On-chip ROM

Figure 18.15 Memory Map in PROM Mode

H8/3028F 数据表(PDF) 645 Page - Renesas Technology Corp

H8/3028F 数据表(HTML) 645 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载