STM8S103F2 datasheet(45/117 Pages) STMICROELECTRONICS

45 / 117 page

Description

Option byte no.

Note: Refer to the family reference manual (RM0016) section on

Flash/EEPROM memory readout protection for details.

UBC[7:0] User boot code area

OPT1

0x00: no UBC, no write-protection

0x01: Page 0 defined as UBC, memory write-protected

0x02: Pages 0 to 1 defined as UBC, memory write-protected.

Page 0 and 1 contain the interrupt vectors.

...

0x7F: Pages 0 to 126 defined as UBC, memory write-protected

Other values: Pages 0 to 127 defined as UBC, memory

write-protected

Note: Refer to the family reference manual (RM0016) section on

Flash write protection for more details.

AFR[7:0]

OPT2

Refer to following section for alternate function remapping decriptions

of bits [7:2] and [1:0] respectively.

HSITRIM:High speed internal clock trimming register size

OPT3

0: 3-bit trimming supported in CLK_HSITRIMR register

1: 4-bit trimming supported in CLK_HSITRIMR register

LSI_EN:Low speed internal clock enable

0: LSI clock is not available as CPU clock source

1: LSI clock is available as CPU clock source

IWDG_HW: Independent watchdog

0: IWDG Independent watchdog activated by software

1: IWDG Independent watchdog activated by hardware

WWDG_HW: Window watchdog activation

0: WWDG window watchdog activated by software

1: WWDG window watchdog activated by hardware

WWDG_HALT: Window watchdog reset on halt

45/117

DocID15441 Rev 9

Option bytes

STM8S103K3 STM8S103F3 STM8S103F2

STM8S103F2 数据表(PDF) 45 Page - STMicroelectronics

STM8S103F2 数据表(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载