WM8960 datasheet(18/92 Pages) WOLFSON

18 / 92 page

WM8960

Production Data

PD, August 2013, Rev 4.2

DEVICE DESCRIPTION

INTRODUCTION

The WM8960 is a low power audio CODEC offering a combination of high quality audio, advanced

features, low power and small size. These characteristics make it ideal for portable digital audio

applications with stereo speaker and headphone outputs such as games consoles, portable media

players and multimedia phones.

Stereo class D speaker drivers can provide >1W per channel into 8

 loads. BTL configuration

provides high power output and excellent PSRR. Low leakage and pop/click suppression

mechanisms allow direct battery connection, reducing component count and power consumption in

portable battery-powered applications. Highly flexible speaker boost settings provide fully internal

level-shifting of analogue output signals, allowing speaker output power to be maximised while

minimising other analogue supply currents, and requiring no additional components.

A flexible input configuration includes support for two stereo microphone interfaces (single-ended or

pseudo-differential) and additional stereo line inputs. Up to three stereo analogue input sources are

available, removing the need for external analogue switches in many applications. Boost amplifiers

are available for additional gain on the microphone inputs and a programmable gain amplifier with a

mixed signal automatic level control (ALC) keeps the recording volume constant.

The stereo ADC and DAC are of hi-fi quality using a 24-bit, low-order oversampling architecture to

deliver optimum performance. A flexible clocking arrangement supports mixed ADC and DAC sample

rates.

The DAC output signal can be mixed with analogue input signals from the line inputs or bypass paths.

This mix is available on speaker and headphone/line outputs.

The WM8960 has a configurable digital audio interface where ADC data can be read and digital audio

playback data fed to the DAC. It supports a number of audio data formats including I

2S, DSP Mode (a

burst mode in which frame sync plus two data packed words are transmitted), MSB-First, left justified

and MSB-First, right justified, and can operate in master or slave modes. In PCM mode A-law and

-

law companding is supported.

The SYSCLK (system clock) provides clocking for the ADCs, DACs, DSP core, class D outputs and

the digital audio interface. SYSCLK can be derived directly from the MCLK pin or via an integrated

PLL, providing flexibility to support a wide range of clocking schemes. All MCLK frequencies typically

used in portable systems are supported for sample rates between 8kHz and 48kHz. A flexible

switching clock for the class D speaker drivers (synchronous with the audio DSP clocks for best

performance) is also derived from SYSCLK.

To allow full software control over all its features, the WM8960 uses a 2 wire control interface. It is

fully compatible and an ideal partner for a wide range of industry standard microprocessors,

controllers and DSPs. Unused circuitry can be disabled via software to save power, while low leakage

currents extend standby and off time in portable battery-powered applications.

WM8960 数据表(PDF) 18 Page - Wolfson Microelectronics plc

WM8960 数据表(HTML) 18 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

数据表下载