STM32F100RC datasheet(39/106 Pages) STMICROELECTRONICS

39 / 106 page

DocID15081 Rev 10

39/106

STM32F100xC, STM32F100xD, STM32F100xE

Electrical characteristics

105

Note:

It is recommended to power VDD and VDDA from the same source. A maximum difference of

300 mV between VDD and VDDA can be tolerated during power-up and operation

5.3.2

Operating conditions at power-up / power-down

Subject to general operating conditions for TA.

Power dissipation at TA =

85 °C for suffix 6 or TA =

105 °C for suffix 7(2)

LQFP144

666

LQFP100

434

LQFP64

444

Ambient temperature for 6

suffix version

Maximum power dissipation

–40

°C

Low power dissipation(3)

–40

105

Ambient temperature for 7

suffix version

Maximum power dissipation

–40

105

°C

Low power dissipation(3)

–40

125

Junction temperature range

6 suffix version

–40

105

°C

7 suffix version

–40

125

1. When the ADC is used, refer to Table 51: ADC characteristics.

2. If TA is lower, higher PD values are allowed as long as TJ does not exceed TJmax (see Section 6.5:

Thermal characteristics on page 100).

3. In low power dissipation state, TA can be extended to this range as long as TJ does not exceed TJmax (see

Section 6.5: Thermal characteristics on page 100).

Table 9. General operating conditions (continued)

Symbol

Parameter

Conditions

Min

Max

Unit

Table 10. Operating conditions at power-up / power-down

Symbol

Parameter

Min

Max

Unit

tVDD

VDD rise time rate

∞

µs/V

VDD fall time rate

∞

STM32F100RC 数据表(PDF) 39 Page - STMicroelectronics

STM32F100RC 数据表(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载