LSM6DSR datasheet(64/168 Pages) STMICROELECTRONICS

64 / 168 page

9.28

DRD_SRC (1Dh)

Portrait, landscape, face-up and face-down source register (r)

Table 79. D6D_SRC register

DEN_DRDY

D6D_IA

Table 80. D6D_SRC register description

DEN_DRDY

DEN data-ready signal. It is set high when data output is related to the data coming from a DEN active

condition.(1)

D6D_IA

Interrupt active for change position portrait, landscape, face-up, face-down. Default value: 0

(0: change position not detected; 1: change position detected)

Z-axis high event (over threshold). Default value: 0

(0: event not detected; 1: event (over threshold) detected)

Z-axis low event (under threshold). Default value: 0

(0: event not detected; 1: event (under threshold) detected)

Y-axis high event (over threshold). Default value: 0

(0: event not detected; 1: event (over-threshold) detected)

Y-axis low event (under threshold). Default value: 0

(0: event not detected; 1: event (under threshold) detected)

X-axis high event (over threshold). Default value: 0

(0: event not detected; 1: event (over threshold) detected)

X-axis low event (under threshold). Default value: 0

(0: event not detected; 1: event (under threshold) detected)

1. The DEN data-ready signal can be latched or pulsed depending on the value of the dataready_pulsed bit of the

COUNTER_BDR_REG1 (0Bh) register.

LSM6DSR

DRD_SRC (1Dh)

DS11976 - Rev 2

page 64/168

LSM6DSR 数据表(PDF) 64 Page - STMicroelectronics