| 数据搜索系统,热门电子元器件搜索 |
|
EFP01 数据表(PDF) 22 Page - Silicon Laboratories |
|
|
|||||||||||||||||||||||||||||
EFP01 数据表(HTML) 22 Page - Silicon Laboratories |
|
22 / 158 page ![]() 3.3 Energy Modes The EFP01 operates in 3 different energy modes to optimize efficiency based on the expected load. Table 3.8. Energy Modes Overview Energy Mode Maximum Out- put Current (per output) BIAS_SW Regis- ter Programming Coarse Regula- tor DCDCs and LDOs ADC Coulomb Coun- ter EM0 Full Output Cur- rent (value de- pends on mode and configuration) BIAS0 = 7 Disabled On, if enabled Available Available EM2 ~20 mA (value depends on mode and configuration) BIAS2 = 1 Disabled On, if enabled. Note that if BB_CTRL6.BB_I PK_NOADJ is set in Boost modes, no peak current adjustment will occur in EM2. Available Available EM4 ~100 uA N/A Enabled accord- ing to setting of CRSREG_EN_X bits in EM_CRSREG_C TRL All DCDCs and LDOs disabled Disabled Not supported 3.3.1 Energy Mode Control The energy mode state of EFP01 can be changed either by I2C or via direct pin control. 3.3.1.1 I2C Control Using standard I2C control, the EFP01's energy mode can be set by writing the EM_STSEL bitfield in the EM_CRSREG_CTRL register. The EFP01's internal pull up resistors on I2C_SDA and I2C_SCL pins will continue to be enabled in EM2 and EM4 modes when using this method. EFP01 Energy Friendly PMIC Family Data Sheet System Overview silabs.com | Building a more connected world. Rev. 1.3 | 22 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |