R5F104FCAFP datasheet(54/207 Pages) RENESAS

54 / 207 page

RL78/G13

2. ELECTRICAL SPECIFICATIONS (TA = –40 to +85°C)

R01DS0131EJ0350 Rev.3.50

54 of 200

Jun 30, 2020

2.3 DC Characteristics

2.3.1 Pin characteristics

(TA = –40 to +85°C, 1.6 V

≤ EVDD0 = EVDD1 ≤ VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V) (1/5)

Items

Symbol

Conditions

MIN.

TYP.

MAX.

Unit

Output current,

highNote 1

IOH1

Per pin for P00 to P07, P10 to P17,

P30 to P37, P40 to P47, P50 to P57, P64 to

P67, P70 to P77, P80 to P87, P90 to P97,

P100 to P106,

P110 to P117, P120, P125 to P127, P130,

P140 to P147

1.6 V

≤ EVDD0 ≤ 5.5 V

–10.0

Note 2

Total of P00 to P04, P07, P32 to P37,

P40 to P47, P102 to P106, P120,

P125 to P127, P130, P140 to P145

(When duty

≤ 70% Note 3)

4.0 V

≤ EVDD0 ≤ 5.5 V

–55.0

2.7 V

≤ EVDD0 < 4.0 V

–10.0

1.8 V

≤ EVDD0 < 2.7 V

–5.0

1.6 V

≤ EVDD0 < 1.8 V

–2.5

Total of P05, P06, P10 to P17, P30, P31,

P50 to P57, P64 to P67, P70 to P77, P80 to

P87, P90 to P97, P100, P101, P110 to

P117, P146, P147

(When duty

≤ 70% Note 3)

4.0 V

≤ EVDD0 ≤ 5.5 V

–80.0

2.7 V

≤ EVDD0 < 4.0 V

–19.0

1.8 V

≤ EVDD0 < 2.7 V

–10.0

1.6 V

≤ EVDD0 < 1.8 V

–5.0

Total of all pins

(When duty

≤ 70% Note 3)

1.6 V

≤ EVDD0 ≤ 5.5 V

–135.0

Note 4

IOH2

Per pin for P20 to P27, P150 to P156

1.6 V

≤ VDD ≤ 5.5 V

–0.1Note 2

Total of all pins

(When duty

≤ 70% Note 3)

1.6 V

≤ VDD ≤ 5.5 V

–1.5

Notes 1.

Value of current at which the device operation is guaranteed even if the current flows from the EVDD0,

EVDD1, VDD pins to an output pin.

However, do not exceed the total current value.

Specification under conditions where the duty factor

≤ 70%.

The output current value that has changed to the duty factor > 70% the duty ratio can be calculated with the

following expression (when changing the duty factor from 70% to n%).

● Total output current of pins = (IOH × 0.7)/(n × 0.01)

<Example> Where n = 80% and IOH = –10.0 mA

Total output current of pins = (–10.0 × 0.7)/(80 × 0.01)

 –8.7 mA

However, the current that is allowed to flow into one pin does not vary depending on the duty factor. A

current higher than the absolute maximum rating must not flow into one pin.

The

applied

current

for

the

products

for

industrial

application

(R5F100xxDxx,

R5F101xxDxx,

R5F100xxGxx) is –100 mA.

Caution

P00, P02 to P04, P10 to P15, P17, P43 to P45, P50, P52 to P55, P71, P74, P80 to P82, P96, and P142 to

P144 do not output high level in N-ch open-drain mode.

Remark

Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port

pins.

R5F104FCAFP 数据表(PDF) 54 Page - Renesas Technology Corp

R5F104FCAFP 数据表(HTML) 54 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

R5F104FCAFP 数据表(PDF) 54 Page - Renesas Technology Corp

R5F104FCAFP 数据表(HTML) 54 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载