| 数据搜索系统,热门电子元器件搜索 |
|
ST92F124 数据表(PDF) 342 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST92F124 数据表(HTML) 342 Page - STMicroelectronics |
|
342 / 429 page ![]() 342/429 CONTROLLER AREA NETWORK (bxCAN) CONTROLLER AREA NETWORK (Cont’d) – The transmit interrupt can be generated by the following events: – Transmit mailbox 0 becomes empty, RQCP0 bit in the CTSR register set. – Transmit mailbox 1 becomes empty, RQCP1 bit in the CTSR register set. – Transmit mailbox 2 becomes empty, RQCP2 bit in the CTSR register set. – The FIFO 0 interrupt can be generated by the following events: – Reception of a new message, FMP bits in the CRFR0 register incremented. – FIFO0 full condition, FULL bit in the CRFR0 register set. – FIFO0 overrun condition, FOVR bit in the CRFR0 register set. – The FIFO 1 interrupt can be generated by the following events: – Reception of a new message, FMP bits in the CRFR1 register incremented. – FIFO1 full condition, FULL bit in the CRFR1 register set. – FIFO1 overrun condition, FOVR bit in the CRFR1 register set. – The error and status change interrupt can be generated by the following events: – Error condition, for more details on error con- ditions please refer to the CAN Error Status register (CESR). – Wake-up condition, SOF monitored on the CAN Rx signal. 10.10.7 Register Access Protection Erroneous access to certain configuration regis- ters can cause the hardware to temporarily disturb the whole CAN network. Therefore the following registers can be modified by software only while the hardware is in initialization mode: CBTR0, CBTR1, CFCR0, CFCR1, CFMR and CDGR registers. Although the transmission of incorrect data will not cause problems at the CAN network level, it can severely disturb the application. A transmit mail- box can be only modified by software while it is in empty state, refer to Figure 147.Transmit Mailbox States The filters must be deactivated before their value can be modified by software. The modification of the filter configuration (scale or mode) can be done by software only in initialization mode. 9 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |