PM7367 datasheet(159/323 Pages) PMC

159 / 323 page

PM7367 FREEDM-32P32

DATA SHEET

PMC-1991499

ISSUE 2

FRAME ENGINE AND DATA LINK MANAGER

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMER’S INTERNAL USE

145

implemented. However, when all four byte enables are negated, no access is

made to this register.

CHAN[4:0]:

The indirect data bits (CHAN[4:0]) report the channel number read from the

RMAC internal memory after an indirect read operation has completed.

Channel number to be written to the RMAC internal memory in an indirect

write operation must be set up in this register before triggering the write.

CHAN[4:0] reflects the value written until the completion of a subsequent

indirect read operation.

PROV:

The indirect provision enable bit (PROV) reports the channel provision enable

flag read from the RMAC internal memory after an indirect read operation has

completed. The provision enable flag to be written to the RMAC internal

memory, in an indirect write operation, must be set up in this register before

triggering the write. When PROV is set high, the channel as indicated by

CHAN[4:0] is provisioned. When PROV is set low, the channel indicated by

CHAN[4:0] is unprovisioned temporarily. Any partially received packets are

flushed and the status in the RPDRR queue is marked unprovisioned. The

channel then returns to being provisioned and PROV will report a logic high at

the next indirect read operation. PROV reflects the value written until the

completion of a subsequent indirect read operation.

RWB:

The Read/Write Bar (RWB) bit selects between a provisioning/unprovisioning

operation (write) or a query operation (read). Writing a logic 0 to RWB

triggers the provisioning or unprovisioning of a channel as specified by

CHAN[4:0] and PROV. Writing a logic 1 to RWB triggers a query of the

channel specified by CHAN[4:0].

BUSY:

The indirect access status bit (BUSY) reports the progress of an indirect

access. BUSY is set high when this register is written to trigger an indirect

access, and will stay high until the access is complete. At which point, BUSY

will be set low. This register should be polled to determine when data from an

indirect read operation is available or to determine when a new indirect write

operation may commence.

PM7367 数据表(PDF) 159 Page - PMC-Sierra, Inc

PM7367 数据表(HTML) 159 Page - PMC-Sierra, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载