MCP8021/2

DS20006265D-page 6

 2020-2024 Microchip Technology Inc. and its subsidiaries

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings†

Input Voltage, VDD..........................................................................................................................(GND – 0.3V) to +40V

Internal Power Dissipation......................................................................................................................Internally Limited

Operating Junction Temperature (Note 2)...............................................................................................-40°C to +165°C

Transient Junction Temperature (Note 1)..............................................................................................................+170°C

Storage Temperature (Note 2) ................................................................................................................-55°C to +165°C

Digital I/O .................................................................................................................................................... -0.3V to 5.5V

Low-Voltage Analog I/O............................................................................................................................... -0.3V to 5.5V

VBx, WAKE ....................................................................................................................................(GND – 0.3V) to +40V

PHx, HSx........................................................................................................................................(GND – 5.5V) to +40V

VBOOT, LSx..................................................................................................................................(GND – 0.3V) to +13.2V

CAP1, CAP2 ..................................................................................................................................(GND – 0.3V) to +40V

ESD and Latch-Up Protection:

All Pins

2kV HBM

Corner Pins

 750V CDM

All Other Pins

 500V CDM

Latch-Up Protection – All Pins........................................................................................................................> 100 mA

Note 1: Transient junction temperatures should not exceed one second in duration. Sustained junction temperatures

above +170°C may impact the device reliability.

2: The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable

junction temperature and the thermal resistance from junction to air (i.e., TA, TJ, JA). Exceeding the

maximum allowable power dissipation may cause the device operating junction temperature to exceed the

maximum +165°C rating. Sustained junction temperatures above +165°C can impact the device reliability.

† Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions

above those indicated in the operational sections of this specification is not intended. Exposure to maxi-

mum rating conditions for extended periods may affect device reliability.

AC/DC CHARACTERISTICS

Electrical Specifications: Unless otherwise noted: TJ = -40°C to +150°C; typical values are for +25°C, VDD = 13.5V,

CVBOOT = 4.7 µF, CVREG =4.7 µF, CCP = 220 nF.

Parameter

Sym.

Min.

Typ.

Max.

Units

Conditions

POWER SUPPLY INPUT

Input Operating Voltage

VDD

4.5

—

40

V

VREG active

6.0

—

29.0

Driver output active

Input Supply Current

(MCP8021)

ISUP

—

5

15

µA

Sleep mode, TJ = +25°C

—

180

330

Standby, OE = 0V

—

500

—

Active, VDD > 13, 5V,

OE > VDIG_HI_TH

—

1200

—

Active, VDD = 6V, TJ = +25°C

Input Supply Current (MCP8022)

ISUP

—

5

15

µA

Sleep mode, TJ =+25°C

—

200

350

Standby, OPAMP = 1, OE = 0V

—

800

1300

Standby, OPAMP = 0, OE = 0V

—

1000

—

Active, VDD > 13, 5V,

OE > VDIG_HI_TH

—

1500

—

Active, OE > VDIG_HI_TH,

VDD =7V, TJ = +25°C

Note 1: Limits based on design, simulation or characterization. Not production tested.