| 数据搜索系统,热门电子元器件搜索 |
|
AD9520-2/PCBZ 数据表(PDF) 72 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9520-2/PCBZ 数据表(HTML) 72 Page - Analog Devices |
|
72 / 84 page ![]() AD9520-2 Rev. 0 | Page 72 of 84 Reg. Addr (Hex) Bit(s) Name Description [5] [4] [3] [2] [1] [0] Level or Dynamic Signal Signal at LD Pin 1 1 0 0 1 0 DYN REF2 clock (not available in differential mode). 1 1 0 0 1 1 DYN Selected reference to PLL (differential reference when in differential mode). 1 1 0 1 0 0 DYN Unselected reference to PLL (not available when in differential mode). 1 1 0 1 0 1 LVL Status of selected reference (status of differential reference); active low. 1 1 0 1 1 0 LVL Status of unselected reference (not available in differential mode); active low. 1 1 0 1 1 1 LVL Status of REF1 frequency (active low). 1 1 1 0 0 0 LVL Status of REF2 frequency (active low). 1 1 1 0 0 1 LVL (Status of REF1 frequency) AND (status of REF2 frequency). 1 1 1 0 1 0 LVL (DLD) AND (Status of selected reference) AND (status of VCO). 1 1 1 0 1 1 LVL Status of VCO frequency (active low). 1 1 1 1 0 0 LVL Selected reference (low = REF2, high = REF1). 1 1 1 1 0 1 LVL DLD; active low. 1 1 1 1 1 0 LVL Holdover active (active low). 1 1 1 1 1 1 LVL N/A, do not use. 01B [7] Enable VCO frequency monitor Enables or disables VCO frequency monitor. [7] = 0; disable the VCO frequency monitor (default). [7] = 1; enable the VCO frequency monitor. 01B [6] Enable REF2 (REFIN) frequency monitor Enables or disables the REF2 frequency monitor. [6] = 0; disable the REF2 frequency monitor (default). [6] = 1; enable the REF2 frequency monitor. 01B [5] Enable REF1 (REFIN) frequency monitor REF1 (REFIN) frequency monitor enabled; this is for both REF1 (single-ended) and REFIN (differential) inputs (as selected by differential reference mode). [5] = 0; disable the REF1 (REFIN) frequency monitor (default). [5] = 1; enable the REF1 (REFIN) frequency monitor. 01B [4:0] REFMON pin control Selects the signal that is connected to the REFMON pin. [4] [3] [2] [1] [0] Level or Dynamic Signal Signal at REFMON Pin 0 0 0 0 0 LVL Ground, dc (default). 0 0 0 0 1 DYN REF1 clock (differential reference when in differential mode). 0 0 0 1 0 DYN REF2 clock (N/A in differential mode). 0 0 0 1 1 DYN Selected reference to PLL (differential reference when in differential mode). 0 0 1 0 0 DYN Unselected reference to PLL (not available in differential mode). 0 0 1 0 1 LVL Status of selected reference (status of differential reference); active high. 0 0 1 1 0 LVL Status of unselected reference (not available in differential mode); active high. 0 0 1 1 1 LVL Status REF1 frequency (active high). 0 1 0 0 0 LVL Status REF2 frequency (active high). 0 1 0 0 1 LVL (Status REF1 frequency) AND (status REF2 frequency). 0 1 0 1 0 LVL (DLD) AND (status of selected reference) AND (status of VCO). 0 1 0 1 1 LVL Status of VCO frequency (active high). 0 1 1 0 0 LVL Selected reference (low = REF1, high = REF2). 0 1 1 0 1 LVL DLD; active low. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |