MPC5633MMLL60 datasheet(97/106 Pages) FREESCALE

97 / 106 page

MPC5634M Microcontroller Data Sheet, Rev. 8

Freescale Semiconductor

Fast

2.5/2.5

1.2/1.2

2.5/2.5

1.2/1.2

2.5/2.5

1.2/1.2

2.5/2.5

1.2/1.2

118

pad_i_hv12

0.5/0.5

3/3

0.4/0.4

1.5/1.5

0.5

N/A

pull_hv

6000

5000/5000

N/A

1 These are worst case values that are estimated from simulation and not tested. The values in the table are

simulated at fSYS = 80 MHz, VDD = 1.14 V to 1.32 V, VDDE = 3 V to 3.6 V, VDDEH = 3 V to 3.6 V, TA = TL to TH.

2 This parameter is supplied for reference and is not guaranteed by design and not tested.

3 Delay and rise/fall are measured to 20% or 80% of the respective signal.

4 This parameter is guaranteed by characterization before qualification rather than 100% tested.

5 In high swing mode, high/low swing pad Vol and Voh values are the same as those of the slew controlled output pads

6 Medium Slew-Rate Controlled Output buffer. Contains an input buffer and weak pullup/pulldown.

7 Output delay is shown in Figure 8. Add a maximum of one system clock to the output delay for delay with respect

to system clock.

8 Can be used on the tester

9 This drive select value is not supported. If selected, it will be approximately equal to 11.

10 Slow Slew-Rate Controlled Output buffer. Contains an input buffer and weak pullup/pulldown.

11 Slow Slew-Rate Controlled Output buffer. Contains an input buffer and weak pullup/pulldown.

12 Stand alone input buffer. Also has weak pull-up/pull-down.

Table 32. Pad AC specifications (1.8 V)

Pad Type

Output Delay (ns)1,2

Low-to-High /

High-to-Low

1 This parameter is supplied for reference and is not guaranteed by design and not tested.

2 Delay and rise/fall are measured to 20% or 80% of the respective signal.

Rise/Fall Edge (ns)3

3 This parameter is guaranteed by characterization before qualification rather than 100% tested.

Drive Load

(pF)

SRC/DSC

Min

Max

Min

Max

MSB,LSB

Fast

3.0/3.0

2.0/1.5

3.0/3.0

2.0/1.5

3.0/3.0

2.0/1.5

3.0/3.0

2.0/1.5

114

4 Can be used on the tester.

Table 31. Pad AC specifications (3.3 V)1 (continued)

Pad Type

Output Delay (ns)2,3

Low-to-High /

High-to-Low

Rise/Fall Edge (ns)3,4

Drive Load

(pF)

SRC/DSC

Min

Max

Min

Max

MSB,LSB

MPC5633MMLL60 数据表(PDF) 97 Page - Freescale Semiconductor, Inc

MPC5633MMLL60 数据表(HTML) 97 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

MPC5633MMLL60 数据表(PDF) 97 Page - Freescale Semiconductor, Inc

MPC5633MMLL60 数据表(HTML) 97 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载