WM8904ECSSLASHR datasheet(181/188 Pages) WOLFSON

181 / 188 page

Pre-Production

WM8904

PP, Rev 3.3, September 2012

181

APPLICATIONS INFORMATION

RECOMMENDED EXTERNAL COMPONENTS

Figure 71 Recommended External Components

Notes:

Decoupling Capacitors

X5R ceramic capacitor is recommended for capacitors C1, C2, C3, C4, C5, C15, C16, C17 and C18.

The positioning of C17 and C18 is very important - these should be as close to the WM8904 as possible.

Capacitors C15 and C16 should also be positioned as close to the WM8904 as possible.

Charge Pump Capacitors

Specific recommendations for C14, C15 and C16 are provided in Table 95. Note that two different recommendations are

provided for C15 and C16; either of these components is suitable, depending upon size requirements and availability.

The positioning of C14 is very important - this should be as close to the WM8904 as possible.

It is important to select a suitable capacitor type for the Charge Pump. Note that the capacitance may vary with DC voltage;

care is required to ensure that required capacitance is achieved at the applicable operating voltage, as specified in Table 95.

The capacitor datasheet should be consulted for this information.

COMPONENT

REQUIRED

CAPACITANCE

VALUE

PART NUMBER

VOLTAGE

TYPE

SIZE

C14 (CPCA-CPCB)

 1F at 2VDC

2.2

F

Kemet C0402C225M9PAC

6.3v

X5R

0402

C15 (CPVOUTN)

C16 (CPVOUTP)

 2F at 2VDC

2.2

F

MuRata GRM188R61A225KE34D

10v

X5R

0603

4.7

F

MuRata GRM155R60J475M_EIA

6.3v

X5R

0402

Table 95 Charge Pump Capacitors

WM8904ECS/R 数据表(PDF) 181 Page - Wolfson Microelectronics plc

WM8904ECS/R 数据表(HTML) 181 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载