 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ST7LITE25F2 数据表(PDF) 22 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7LITE25F2 数据表(HTML) 22 Page - STMicroelectronics |
|
|
22 / 166 page  Flash program memory ST7LITE20F2 ST7LITE25F2 ST7LITE29F2 22/166 Doc ID 8349 Rev 5 Caution: During normal operation the ICCCLK pin must be pulled up, internally or externally (external pull-up of 10k mandatory in noisy environment). This is to avoid entering ICC mode unexpectedly during a reset. In the application, even if the pin is configured as output, any reset will put it back in input pull-up. Figure 5. Typical ICC interface 4.5 Memory protection There are two different types of memory protection: Read-Out Protection and Write/Erase Protection which can be applied individually. 4.5.1 Read-out protection Read-out protection, when selected provides a protection against program memory content extraction and against write access to Flash memory. Even if no protection can be considered as totally unbreakable, the feature provides a very high level of protection for a general purpose microcontroller. Both program and data E2 memory are protected. In flash devices, this protection is removed by reprogramming the option. In this case, both program and data E2 memory are automatically erased and the device can be reprogrammed. Read-out protection selection depends on the device type: ● In Flash devices it is enabled and removed through the FMP_R bit in the option byte. ● In ROM devices it is enabled by mask option specified in the Option List. 4.5.2 Flash write/erase protection Write/erase protection, when set, makes it impossible to both overwrite and erase program memory. It does not apply to E2 data. Its purpose is to provide advanced security to applications and prevent any change being made to the memory content. Caution: Once set, Write/erase protection can never be removed. A write-protected flash device is no longer reprogrammable. ICC connector HE10 connector type Application power supply 1 2 4 6 8 10 97 5 3 Programming tool ICC connector Application board ICC Cable ST7 Optional Application reset source Application I/O |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
