MPC5601PEF0MLL4R datasheet(14/95 Pages) FREESCALE

14 / 95 page

MPC5602P Microcontroller Data Sheet, Rev. 4.1

Freescale Semiconductor

•

Programmable transmit-first scheme: lowest ID or lowest buffer number

•

Time stamp based on 16-bit free-running timer

•

Global network time, synchronized by a specific message

•

Maskable interrupts

•

Independent of the transmission medium (an external transceiver is assumed)

•

High immunity to EMI

•

Short latency time due to an arbitration scheme for high-priority messages

•

Transmit features

— Supports configuration of multiple mailboxes to form message queues of scalable depth

— Arbitration scheme according to message ID or message buffer number

— Internal arbitration to guarantee no inner or outer priority inversion

— Transmit abort procedure and notification

•

Receive features

— Individual programmable filters for each mailbox

— 8 mailboxes configurable as a 6-entry receive FIFO

— 8 programmable acceptance filters for receive FIFO

•

Programmable clock source

— System clock

— Direct oscillator clock to avoid PLL jitter

1.5.21

Safety port (FlexCAN)

The MPC5602P MCU has a second CAN controller synthesized to run at high bit rates to be used as a safety port. The CAN

module of the safety port provides the following features:

•

Identical to the FlexCAN module

•

Bit rate up to 8 Mbit/s at 64 MHz CPU clock using direct connection between CAN modules (no physical transceiver

required)

•

32 message buffers of up to 8-bytes data length

•

Can be used as a second independent CAN module

1.5.22

Serial communication interface module (LINFlex)

The LINFlex (local interconnect network flexible) on the MPC5602P features the following:

•

Supports LIN Master mode (both instances), LIN Slave mode (only one instance) and UART mode

•

LIN state machine compliant to LIN1.3, 2.0 and 2.1 specifications

•

Handles LIN frame transmission and reception without CPU intervention

•

LIN features

— Autonomous LIN frame handling

— Message buffer to store Identifier and up to 8 data bytes

— Supports message length of up to 64 bytes

— Detection and flagging of LIN errors (sync field, delimiter, ID parity, bit framing, checksum, and time-out)

— Classic or extended checksum calculation

— Configurable Break duration of up to 36-bit times

— Programmable baud rate prescalers (13-bit mantissa, 4-bit fractional)

— Diagnostic features: Loop back; Self Test; LIN bus stuck dominant detection

— Interrupt-driven operation with 16 interrupt sources

MPC5601PEF0MLL4R 数据表(PDF) 14 Page - Freescale Semiconductor, Inc

MPC5601PEF0MLL4R 数据表(HTML) 14 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

数据表下载