| 数据搜索系统,热门电子元器件搜索 |
|
MCP48FVB21 数据表(PDF) 41 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP48FVB21 数据表(HTML) 41 Page - Microchip Technology |
|
41 / 84 page ![]() 2015 Microchip Technology Inc. DS20005466A-page 41 MCP48FVBXX 5.3.2 OUTPUT VOLTAGE The volatile DAC Register values, along with the device configuration bits, control the analog VOUT voltage. The volatile DAC Register’s value is unsigned binary. The formula for the output voltage is given in Equation 5-2. Table 5-3 shows examples of volatile DAC register values and the corresponding theoretical VOUT voltage for the MCP48FVBXX devices. EQUATION 5-2: CALCULATING OUTPUT VOLTAGE (VOUT) The following events update the DAC register value and therefore the analog voltage output (VOUT): • Power-on Reset • Brown-out Reset • Write command The VOUT voltage will start driving to the new value after any of these events has occurred. 5.3.3 STEP VOLTAGE (VS) The Step Voltage is dependent on the device resolution and the calculated output voltage range. 1 LSb is defined as the ideal voltage difference between two successive codes. The step voltage can easily be calculated by using Equation 5-3. Theoretical step voltages are shown in Table 5-2 for several VREF voltages. EQUATION 5-3: VS CALCULATION Note: When Gain = 2 (VRL = VREF) and if VREF > VDD / 2, the VOUT voltage will be limited to VDD. So if VREF = VDD, then the VOUT voltage will not change for volatile DAC Register values mid-scale and greater, since the op amp is at full-scale output. Where: # of Resistors in Resistor Ladder = 4096 (MCP48FVB2X) = 1024 (MCP48FVB1X) =256 (MCP48FVB0X) V OUT V RL DAC Register Value # of Resistors in Resistor Ladder ------------------------------------------------------------------------------ Gain = TABLE 5-2: THEORETICAL STEP VOLTAGE (VS) (1) VREF 5.0 2.7 1.8 1.5 1.0 VS 1.22 mV 659 µV 439 µV 366 µV 244 µV 12-bit 4.88 mV 2.64 mV 1.76 mV 1.46 mV 977 µV 10-bit 19.5 mV 10.5 mV 7.03 mV 5.86 mV 3.91 mV 8-bit Note 1: When Gain = 1x, VFS = VRL, and VZS = 0V. Where: # of Resistors in Resistor Ladder = 4096 (12-bit) = 1024 (10-bit) = 256 (8-bit) V S V RL # of Resistors in Resistor Ladder ------------------------------------------------------------------------------ Gain = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |